Electrolux 76669 manual What to do if, Trouble Shooting, Problem Possible Cause Remedy

Page 31

Operating Instructions

What to do if...

Trouble Shooting

If the appliance is not working correctly, please carry out the following checks before contacting your local AEG Service Force Centre.

Important: If you call out an engineer to a fault listed below, or to re- pair a fault caused by incorrect use or installation, a charge will be made even if the appliance is in guarantee.

• If the fault code C1, C2 or Cd is shown in the multi-display, you may be able to remedy the fault yourself (see the Faults table below).

When you have remedied the fault, press the START/PAUSE button.

•With all other displayed faults (C plus number or letter): switch appli- ance off and on again. Reset the wash programme and press the

START/PAUSE button.

If the fault code is displayed again, please contact the Customer Service department quoting the fault code.

	Problem	Possible Cause	Remedy
		The mains plug is not	Plug in the mains plug.
		plugged in.	Plug in the mains plug.
		plugged in.
		The house fuse has blown.	Replace the fuse.
	The washing machine	The door is not correctly	Close the door; The lock must
	does not work.	The door is not correctly	Close the door; The lock must
	does not work.	closed.	engage audibly.
		closed.	engage audibly.
		START/PAUSE button not	Keep the START/PAUSE but-
		START/PAUSE button not	ton pressed until the pro-
		pressed long enough.	ton pressed until the pro-
		pressed long enough.	gramme begins.
			gramme begins.
			Cancel the child safety fea-
	Door cannot be closed.	The child safety feature is set	ture (see Section "Child
			Safety Feature“).
	The fault code Cd ap-
	pears. The displays PRE	The door is not correctly	Close the door correctly.
	WASH, RINSE and	closed.	Start the programme again.
	RINSE+ are flashing.

31

Image 31

Contents ÖKO-LAVAMAT 76669 update Appliance Dear CustomerPages of this instruction book Future ownersContents Installation and connection instructions Page Prior to initial start-up SafetyIntended Use General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsFront view Description of the ApplianceDetergent dispenser drawer Programme selector Control panelWOOL/SILK P Hand-wash Main wash cycle for delicates at 30 C or 40 CIs rinsed in, spin Additional programme buttons Consumption data Programme selector Load Water Energy TemperatureRun time display Before the first wash What does Update mean?Sorting and preparing a wash load Preparing a Wash LoadTypes of Washing and Care Symbols Water softening Quantities of detergent and conditioners?Water hardness details Running a washing cycle When the washing programme has endedBrief instructions Possible programme options to suit the type of washing Setting the Washing ProgrammeChanging the spin speed Setting the delay timer/soaking timeDelay timer Changing the spin speed/Selecting the rinse hold functionOpening and closing the door Soak timeLoading the washing Or for water softening agent If using liquid detergent / tabletsAdd detergent / conditioner Compartment for pre-wash/soaking detergentStarting a wash programme If a time delay has been setIs pressed Stopping the programme Washing Programme ProgressProgramme progress display Multi-displayAfter the programme has ended End of the wash cycle/removing the washingIf Rinse Hold has been selected Wash If the Easy Iron programme has been selectedWashing Programme tablesType of washing Max. load size Separate conditioning/starchingSeparate rinsing Separate spinMaintenance and Cleaning Main door Maintenance WashTo run a maintenance wash Washing Machine DrumProblem Possible Cause Remedy Trouble ShootingWhat to do if Water tap is closed Open the water tap Inlet hose is leaking Connection Lights up green If there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleHave a flat container on hand to catch the water Carrying out an emergency emptyingIng pumped out, e.g. if the pump is blocked When the water is completely drainedBefore cleaning the drain pump Drain pumpOperating Instructions Helpful to rinse with extra water Setting the additional rinse functionCancelling the additional rinse function Additional Rinse RINSE+Additional Rinse and Water Cooling Setting the water cooling functionCancelling the water cooling function Water CoolingStarted Child Safety FeatureCancelling the child safety feature Washing programme can beInstallation Safety Precautions Installation and connection instructionsTransporting the appliance Installation of the applianceRemove transport packaging Are supplied with it Installation-Site preparationCover the hole with the cap C Check that the appliance is level using a spirit level Installation on a Suspended FloorLevelling the Appliance Measures not be observed Electrical ConnectionEarth Blue Neutral Brown Live User Water connectionPermanent Connection TerferenceWater pressure Inlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical DataDimensions in mm Exclusions Standard guarantee conditionsEuropean Guarantee Great BritainIndex Customer Care 0870 5 929AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG