Electrolux 50550 manual What to do if, Remedying Faults

Page 30

Instructions for use

What to do if ...

Remedying Faults

In the event of a fault, try to solve the problem yourself with the aid of the information provided here. If you call Customer Service to deal with one of the faults listed here or to remedy an operating fault, the customer service technician's visit will not be free of charge, even dur- ing the warranty period.

	Problem	Possible Cause	Remedy
		The power plug is not	Connect the plug to a power
		connected.	outlet.
		A domestic fuse has tripped.	Replace the fuse.
	The washing machine	The door is not closed prop-	Close the door;
	The washing machine	The door is not closed prop-	there should be an audible
	does not work.	erly.	there should be an audible
	does not work.	erly.	click.
			click.
		The START/PAUSE (MARCHE/	Press and hold the START/
		PAUSE, START/PAUZE) button	PAUSE (MARCHE/PAUSE,
		was not pressed for long	START/PAUZE) button until
		enough.	the programme starts.
	The door cannot be	The child safety device is	Release the child safety de-
	The door cannot be	The child safety device is	vice (see section “Child safety
	closed.	engaged.	vice (see section “Child safety
	closed.	engaged.	feature”).
			feature”).
	The END (FIN/EINDE)	The door is not closed	Close the door properly.
	indicator flashes	The door is not closed	Close the door properly.
	indicator flashes	properly.	Re-start the programme.
	4 times.	properly.	Re-start the programme.
	4 times.
		The water tap is closed.	Open the water tap. Re-start
		The water tap is closed.	the programme.
			the programme.
			Switch off the washing ma-
			chine:
	The END (FIN/EINDE)	The filter in the threaded in-	Close the water tap. Remove
	The END (FIN/EINDE)	The filter in the threaded in-	the plug from the mains, un-
	indicator flashes once.	let hose fitting is blocked.	screw the hose from the wa-
			screw the hose from the wa-
			ter tap, take out the filter
			and wash it in running water.
		Water tap is furred with	Check the water tap and
		limescale or faulty.	have it repaired, if necessary.

30

Image 30

Contents Lavamat 50550 Electronic Dear customer Contents Setting up and connection instructions What to do ifPage Before Putting into Operation for the First Time SafetyInstructions for use Correct UseChild Safety General SafetyFor polyoxymethylene, e.g. plastic clips DisposalDispose the packing material Dispose the old applianceEnvironment Tips Unit Description Front ViewDrawer for Detergent and Conditioners Control Panel Programme KnobMain wash cycle for Cottons/Linen from 30 C to 95 C Rinses, liquid additive washed in from compartment æ, spin Main wash programme for Delicates at 30 C or 40 CWOOL/SILK LAINE/SOIE, WOL/ZIJDE P Handwash Draining of the water after a Rinse Hold without spinningProgramme Option Buttons Shorter washing cycle for slightly dirty washingConsumption values and programme times Before the First WashPull out the washing powder drawer slightly Prepare the Washing Cycle Sort and Prepare the WashingTypes of washing and care symbols Detergent and Conditioners Which detergent and conditioner? How much detergent and conditioner?Water Softener Performing a Wash Cycle Brief guideAfter the wash programme is complete Light indicate whether the door can be opened Opening and Closing the DoorAdd the Washing AgainIf using liquid detergents/tablets Adding detergent/conditionersDetergents and conditioners Setting the washing programme For the appropriate proTo change the Spin Speed for the final rinse or PLEINE, Spoelstop comes onAccording to the wash programme Wash Programme Progress Setting the delay timerStarting the Wash Programme Programme Progress DisplayWater is drained or the washing is spun Changing or cancelling the programmeChanging the washing programme Selecting a programme optionEnd of Wash Cycle/Removing the Washing After a Rinse Hold, the water must first be drainedProgramme Tables WashingSeparate Rinsing Separate SpinningCleaning and Care Washing Detergent DrawerWashing Drum Filling DoorRemedying Faults What to do ifTransit bolt/bars were As described Not removed Screw the inlet hose START/PAUSE OFF ARRET/UIT If there are still grey stains on the washing If the washing result is not satisfactoryIf the washing is grey and limescale forms in the drum If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation Before cleaning the drain pump When all the washing solution has drained offHousing foreign objects are protected by the pump wheel Drain pumpInstructions for use Helpful to rinse with extra water To cancel the additional rinse cyclesAdditional rinse cycles RINSE+/RINCAGE+, SPOELEN+ To set the additional rinse cyclesChild Safety Feature Setting the Child Safety FeatureCancelling the Child Safety Feature Setting up and connection instructions Safety Instructions for InstallationTransporting the Unit Setting Up the UnitRemove the Transport Safeguard TuresSpecial button a and the plug caps B 2 ea. and C 1 ea. are Supplied with the unitPrepare the Installation Location Setting Up on a Concrete PedestalSetting Up on a Vibrating floor Compensate for Floor Unevenness Electrical Connection Water ConnectionPermissible Water Pressure Water Inflow Water Drainage Water Drainage into a SiphonDraining the water into a basin Delivery Heads over 1m Technical DataDimensions Measurements in mmGuarantee conditions BelgiumGuarantee conditions Customer services Tel FaxPage Index AdditivesService When do you incur costs even during the warranty period?AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG