Electrolux 50550 manual Compensate for Floor Unevenness

Page 45

Setting up and connection instructions

Compensate for Floor Unevenness

Floor unevenness can be compensated for and the height can be cor- rected with the four adjustable screw feet. The height can be adjusted in a range of +10 ... -5 mm.

To adjust the feet use the special spanner supplied for removing the transport braces.

01. Slide the special key firmly onto the hexagon head of the

threaded foot as far as it will go.

2. Adjust the screw feet so that the unit is horizontal and stable. The unit must not wobble over when loaded.

3. If necessary, check the setting with a spirit level.

Attention! Never compensate for minor floor unevenness with un- derlays made of wood, card etc.

Always adjust the adjustable feet.

45

Image 45

Contents Lavamat 50550 Electronic Dear customer Contents What to do if Setting up and connection instructionsPage Instructions for use SafetyBefore Putting into Operation for the First Time Correct UseGeneral Safety Child SafetyDispose the packing material DisposalFor polyoxymethylene, e.g. plastic clips Dispose the old applianceEnvironment Tips Unit Description Front ViewDrawer for Detergent and Conditioners Control Panel Programme KnobMain wash cycle for Cottons/Linen from 30 C to 95 C WOOL/SILK LAINE/SOIE, WOL/ZIJDE P Handwash Main wash programme for Delicates at 30 C or 40 CRinses, liquid additive washed in from compartment æ, spin Draining of the water after a Rinse Hold without spinningShorter washing cycle for slightly dirty washing Programme Option ButtonsConsumption values and programme times Before the First WashPull out the washing powder drawer slightly Sort and Prepare the Washing Prepare the Washing CycleTypes of washing and care symbols Detergent and Conditioners Which detergent and conditioner? How much detergent and conditioner?Water Softener Performing a Wash Cycle Brief guideAfter the wash programme is complete Add the Washing Opening and Closing the DoorLight indicate whether the door can be opened AgainIf using liquid detergents/tablets Adding detergent/conditionersDetergents and conditioners For the appropriate pro Setting the washing programmeTo change the Spin Speed for the final rinse or PLEINE, Spoelstop comes onAccording to the wash programme Starting the Wash Programme Setting the delay timerWash Programme Progress Programme Progress DisplayChanging the washing programme Changing or cancelling the programmeWater is drained or the washing is spun Selecting a programme optionAfter a Rinse Hold, the water must first be drained End of Wash Cycle/Removing the WashingWashing Programme TablesSeparate Spinning Separate RinsingWashing Detergent Drawer Cleaning and CareFilling Door Washing DrumWhat to do if Remedying FaultsTransit bolt/bars were As described Not removed Screw the inlet hose START/PAUSE OFF ARRET/UIT If the washing is grey and limescale forms in the drum If the washing result is not satisfactoryIf there are still grey stains on the washing If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation Housing foreign objects are protected by the pump wheel When all the washing solution has drained offBefore cleaning the drain pump Drain pumpInstructions for use Additional rinse cycles RINSE+/RINCAGE+, SPOELEN+ To cancel the additional rinse cyclesHelpful to rinse with extra water To set the additional rinse cyclesChild Safety Feature Setting the Child Safety FeatureCancelling the Child Safety Feature Safety Instructions for Installation Setting up and connection instructionsRemove the Transport Safeguard Setting Up the UnitTransporting the Unit TuresSupplied with the unit Special button a and the plug caps B 2 ea. and C 1 ea. arePrepare the Installation Location Setting Up on a Concrete PedestalSetting Up on a Vibrating floor Compensate for Floor Unevenness Electrical Connection Water ConnectionPermissible Water Pressure Water Inflow Water Drainage Water Drainage into a SiphonDraining the water into a basin Dimensions Technical DataDelivery Heads over 1m Measurements in mmBelgium Guarantee conditionsGuarantee conditions Tel Fax Customer servicesPage Additives IndexWhen do you incur costs even during the warranty period? ServiceAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG