Electrolux 50550 Setting up and connection instructions, Safety Instructions for Installation

Page 41

Setting up and connection instructions

Setting up and connection instructions

Safety Instructions for Installation

•Do not tilt the washing machine onto its front or onto its right side (looking from the front). Electrical components could get wet!

•Check the washing machine for transport damage. Never connect a damaged unit. Consult your supplier in the event of damage.

•Ensure that all parts of the transport safeguard have been removed and that the splash guard is fitted to the unit, see ”Removing the Transport Safeguard”. Otherwise, damage to the unit or to adjacent furniture could occur during spinning.

•Always insert the plug into a correctly installed PE socket.

•In the case of permanent installation: A permanent installation may only be made by an authorised specialist.

•Before putting the unit into operation, ensure that the rated voltage and current type shown on the unit's rating plate are the same as the mains voltage and current type at the installation location. The re- quired electrical fuse is also shown on the rating plate.

•Should work be carried out on the water supply installations in order to allow the machine to be connected properly to the water supply, this work must be carried out by an authorised installer.

•Should work be carried out on the mains supply in order to allow the machine to be connected properly to the electricity supply, this work must be carried out by an authorised electrician.

•The mains cable may only be replaced by the Customer Service or by an authorised specialist.

41

Image 41

Contents Lavamat 50550 Electronic Dear customer Contents What to do if Setting up and connection instructionsPage Instructions for use SafetyBefore Putting into Operation for the First Time Correct UseGeneral Safety Child SafetyDispose the packing material DisposalFor polyoxymethylene, e.g. plastic clips Dispose the old applianceEnvironment Tips Drawer for Detergent and Conditioners Unit DescriptionFront View Main wash cycle for Cottons/Linen from 30 C to 95 C Control PanelProgramme Knob WOOL/SILK LAINE/SOIE, WOL/ZIJDE P Handwash Main wash programme for Delicates at 30 C or 40 CRinses, liquid additive washed in from compartment æ, spin Draining of the water after a Rinse Hold without spinningShorter washing cycle for slightly dirty washing Programme Option ButtonsPull out the washing powder drawer slightly Consumption values and programme timesBefore the First Wash Sort and Prepare the Washing Prepare the Washing CycleTypes of washing and care symbols Water Softener Detergent and Conditioners Which detergent and conditioner?How much detergent and conditioner? After the wash programme is complete Performing a Wash CycleBrief guide Add the Washing Opening and Closing the DoorLight indicate whether the door can be opened AgainDetergents and conditioners If using liquid detergents/tabletsAdding detergent/conditioners For the appropriate pro Setting the washing programmeAccording to the wash programme To change the Spin Speed for the final rinse orPLEINE, Spoelstop comes on Starting the Wash Programme Setting the delay timerWash Programme Progress Programme Progress DisplayChanging the washing programme Changing or cancelling the programmeWater is drained or the washing is spun Selecting a programme optionAfter a Rinse Hold, the water must first be drained End of Wash Cycle/Removing the WashingWashing Programme TablesSeparate Spinning Separate RinsingWashing Detergent Drawer Cleaning and CareFilling Door Washing DrumWhat to do if Remedying FaultsTransit bolt/bars were As described Not removed Screw the inlet hose START/PAUSE OFF ARRET/UIT If the washing is grey and limescale forms in the drum If the washing result is not satisfactoryIf there are still grey stains on the washing If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation Housing foreign objects are protected by the pump wheel When all the washing solution has drained offBefore cleaning the drain pump Drain pumpInstructions for use Additional rinse cycles RINSE+/RINCAGE+, SPOELEN+ To cancel the additional rinse cyclesHelpful to rinse with extra water To set the additional rinse cyclesCancelling the Child Safety Feature Child Safety FeatureSetting the Child Safety Feature Safety Instructions for Installation Setting up and connection instructionsRemove the Transport Safeguard Setting Up the UnitTransporting the Unit TuresSupplied with the unit Special button a and the plug caps B 2 ea. and C 1 ea. areSetting Up on a Vibrating floor Prepare the Installation LocationSetting Up on a Concrete Pedestal Compensate for Floor Unevenness Permissible Water Pressure Electrical ConnectionWater Connection Water Inflow Draining the water into a basin Water DrainageWater Drainage into a Siphon Dimensions Technical DataDelivery Heads over 1m Measurements in mmBelgium Guarantee conditionsGuarantee conditions Tel Fax Customer servicesPage Additives IndexWhen do you incur costs even during the warranty period? ServiceAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG