Electrolux 50550 manual Opening and Closing the Door, Add the Washing, Again

Page 19

Instructions for use

Opening and Closing the Door

0To open: pull the door by the handle.

0To close: push the door in firmly.

When the appliance is switched on, the DOOR (PORTE/DEUR) and the START/PAUSE

(MARCHE/PAUSE, START/PAUZE)

light indicate whether the door can be opened:

	Indicator DOOR	Indicator START/PAUSE	Can the door be opened?
	(PORTE/DEUR)	(MARCHE/PAUSE,START/PAUZE)	Can the door be opened?
	(PORTE/DEUR)	(MARCHE/PAUSE,START/PAUZE)
	flashes	flashes	yes, after about 2 minutes
	lit	lit	no1)
	is off	flashes	yes

1) Door is locked due to high water level or high temperature.

3	If the END (FIN/EINDE) light flashes 4 times, it means there was an at-
	tempt to start a wash programme without closing the door properly. If
	this happens, push the door in firmly and start the wash programme
	again.
Add the Washing
3	For the maximum filling quantities, refer to the ”Program Tables”.
	For information on the correct preparation of the washing, see ”Sort

and Prepare the Washing”.

01. Sort and prepare the washing according to type.

2.Open the filling door: Pull on the handle of the filling door.

3. Fill with washing.

Attention! When closing the door, make sure no items of washing get stuck! This could damage textiles and the unit.

4. Close the filling door securely.

19

Image 19

Contents Lavamat 50550 Electronic Dear customer Contents What to do if Setting up and connection instructionsPage Correct Use SafetyInstructions for use Before Putting into Operation for the First TimeGeneral Safety Child SafetyDispose the old appliance DisposalDispose the packing material For polyoxymethylene, e.g. plastic clipsEnvironment Tips Front View Unit DescriptionDrawer for Detergent and Conditioners Programme Knob Control PanelMain wash cycle for Cottons/Linen from 30 C to 95 C Draining of the water after a Rinse Hold without spinning Main wash programme for Delicates at 30 C or 40 CWOOL/SILK LAINE/SOIE, WOL/ZIJDE P Handwash Rinses, liquid additive washed in from compartment æ, spinShorter washing cycle for slightly dirty washing Programme Option ButtonsBefore the First Wash Consumption values and programme timesPull out the washing powder drawer slightly Sort and Prepare the Washing Prepare the Washing CycleTypes of washing and care symbols How much detergent and conditioner? Detergent and Conditioners Which detergent and conditioner?Water Softener Brief guide Performing a Wash CycleAfter the wash programme is complete Again Opening and Closing the DoorAdd the Washing Light indicate whether the door can be openedAdding detergent/conditioners If using liquid detergents/tabletsDetergents and conditioners For the appropriate pro Setting the washing programmePLEINE, Spoelstop comes on To change the Spin Speed for the final rinse orAccording to the wash programme Programme Progress Display Setting the delay timerStarting the Wash Programme Wash Programme ProgressSelecting a programme option Changing or cancelling the programmeChanging the washing programme Water is drained or the washing is spunAfter a Rinse Hold, the water must first be drained End of Wash Cycle/Removing the WashingWashing Programme TablesSeparate Spinning Separate RinsingWashing Detergent Drawer Cleaning and CareFilling Door Washing DrumWhat to do if Remedying FaultsTransit bolt/bars were As described Not removed Screw the inlet hose START/PAUSE OFF ARRET/UIT If foam is still visible after the final rinse If the washing result is not satisfactoryIf the washing is grey and limescale forms in the drum If there are still grey stains on the washingCarry Out an Emergency Emptying Operation Drain pump When all the washing solution has drained offHousing foreign objects are protected by the pump wheel Before cleaning the drain pumpInstructions for use To set the additional rinse cycles To cancel the additional rinse cyclesAdditional rinse cycles RINSE+/RINCAGE+, SPOELEN+ Helpful to rinse with extra waterSetting the Child Safety Feature Child Safety FeatureCancelling the Child Safety Feature Safety Instructions for Installation Setting up and connection instructionsTures Setting Up the UnitRemove the Transport Safeguard Transporting the UnitSupplied with the unit Special button a and the plug caps B 2 ea. and C 1 ea. areSetting Up on a Concrete Pedestal Prepare the Installation LocationSetting Up on a Vibrating floor Compensate for Floor Unevenness Water Connection Electrical ConnectionPermissible Water Pressure Water Inflow Water Drainage into a Siphon Water DrainageDraining the water into a basin Measurements in mm Technical DataDimensions Delivery Heads over 1mBelgium Guarantee conditionsGuarantee conditions Tel Fax Customer servicesPage Additives IndexWhen do you incur costs even during the warranty period? ServiceAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG