Electrolux 50550 manual Electrical Connection, Water Connection, Permissible Water Pressure

Page 46

Setting up and connection instructions

Electrical Connection

Refer to the rating plate for details of the mains voltage, current type and the necessary fuses. The rating plate is located at the top behind the filling door.

; This unit conforms to the following EU directives:

–the ”Low Voltage Directive" 73/23/EU with changes

–the ”EMC Directive" 89/336/EWG with changes

Water Connection

3	The washing machine has safety features which prevent contamination
	of the drinking water and which conform to the legal regulations of

the water authorities (e.g. for Germany: DVGW regulations). Other pro- tection measures in the installation are therefore not necessary.

Attention!

– Units for connection to cold water must not be connected to hot wa- ter!

– Use only new sets of hoses for connection!

Permissible Water Pressure

The water pressure must be at least 1bar (= 10N/cm2 = 0.1MPa), maxi- mum 10bar (= 100N/cm2 = 1MPa).

•In the case of more than 10bar: Connect a pressure-reducing valve upstream.

•In the case of less than 1bar: Unscrew the intake hose on the unit side on the inlet solenoid valve and remove the flow regulator (to do this, remove the filter with pointed pliers and remove the rubber washer behind). Replace the filter.

46

Image 46

Contents Lavamat 50550 Electronic Dear customer Contents Setting up and connection instructions What to do ifPage Before Putting into Operation for the First Time SafetyInstructions for use Correct UseChild Safety General SafetyFor polyoxymethylene, e.g. plastic clips DisposalDispose the packing material Dispose the old applianceEnvironment Tips Front View Unit DescriptionDrawer for Detergent and Conditioners Programme Knob Control PanelMain wash cycle for Cottons/Linen from 30 C to 95 C Rinses, liquid additive washed in from compartment æ, spin Main wash programme for Delicates at 30 C or 40 CWOOL/SILK LAINE/SOIE, WOL/ZIJDE P Handwash Draining of the water after a Rinse Hold without spinningProgramme Option Buttons Shorter washing cycle for slightly dirty washingBefore the First Wash Consumption values and programme timesPull out the washing powder drawer slightly Prepare the Washing Cycle Sort and Prepare the WashingTypes of washing and care symbols How much detergent and conditioner? Detergent and Conditioners Which detergent and conditioner?Water Softener Brief guide Performing a Wash CycleAfter the wash programme is complete Light indicate whether the door can be opened Opening and Closing the DoorAdd the Washing AgainAdding detergent/conditioners If using liquid detergents/tabletsDetergents and conditioners Setting the washing programme For the appropriate proPLEINE, Spoelstop comes on To change the Spin Speed for the final rinse orAccording to the wash programme Wash Programme Progress Setting the delay timerStarting the Wash Programme Programme Progress DisplayWater is drained or the washing is spun Changing or cancelling the programmeChanging the washing programme Selecting a programme optionEnd of Wash Cycle/Removing the Washing After a Rinse Hold, the water must first be drainedProgramme Tables WashingSeparate Rinsing Separate SpinningCleaning and Care Washing Detergent DrawerWashing Drum Filling DoorRemedying Faults What to do ifTransit bolt/bars were As described Not removed Screw the inlet hose START/PAUSE OFF ARRET/UIT If there are still grey stains on the washing If the washing result is not satisfactoryIf the washing is grey and limescale forms in the drum If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation Before cleaning the drain pump When all the washing solution has drained offHousing foreign objects are protected by the pump wheel Drain pumpInstructions for use Helpful to rinse with extra water To cancel the additional rinse cyclesAdditional rinse cycles RINSE+/RINCAGE+, SPOELEN+ To set the additional rinse cyclesSetting the Child Safety Feature Child Safety FeatureCancelling the Child Safety Feature Setting up and connection instructions Safety Instructions for InstallationTransporting the Unit Setting Up the UnitRemove the Transport Safeguard TuresSpecial button a and the plug caps B 2 ea. and C 1 ea. are Supplied with the unitSetting Up on a Concrete Pedestal Prepare the Installation LocationSetting Up on a Vibrating floor Compensate for Floor Unevenness Water Connection Electrical ConnectionPermissible Water Pressure Water Inflow Water Drainage into a Siphon Water DrainageDraining the water into a basin Delivery Heads over 1m Technical DataDimensions Measurements in mmGuarantee conditions BelgiumGuarantee conditions Customer services Tel FaxPage Index AdditivesService When do you incur costs even during the warranty period?AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG