Electrolux 50550 manual Transit bolt/bars were As described Not removed

Page 31

			Instructions for use

	Problem	Possible Cause	Remedy
			First turn the programme se-
	The END (FIN/EINDE)	The programme selector has	lector to OFF (ARRET/UIT),
	indicator flashes	not clicked into place cor-	then set the desired pro-
	8 times.	rectly.	gramme to the exact posi-
			tion.
			Remove the transit bolts/bars
		The transit bolt/bars were	as described in the
		not removed.	Installation and Connection
			instructions.
		The height-adjustable screw	Adjust the screw feet as de-
		feet have not been set	scribed in the Installation
		correctly.	and Connection instructions.
	The washing machine	There is very little washing in	Operation is not affected by
	vibrates when operat-	There is very little washing in	Operation is not affected by
	ing or is noisy.	the drum (for example, only	this.
	ing or is noisy.	one bathrobe).	this.
		one bathrobe).
			Check the positioning of the
		Water could not be drained	outlet hose and even out any
		completely before spinning,	kinks if necessary or clean
		because the outlet hose has	the drain pump and remove
		got a kink in it or the drain	any foreign matter that
		pump is blocked.	might be in the pump hous-
			ing.

	The main wash deter-	Probably too much detergent	Follow the manufacturer's
	gent solution produces	Probably too much detergent	instructions exactly, when
	too many suds.	was used.	measuring out detergent.
	too many suds.		measuring out detergent.

31

Image 31

Contents Lavamat 50550 Electronic Dear customer Contents What to do if Setting up and connection instructionsPage Correct Use SafetyInstructions for use Before Putting into Operation for the First TimeGeneral Safety Child SafetyDispose the old appliance DisposalDispose the packing material For polyoxymethylene, e.g. plastic clipsEnvironment Tips Front View Unit DescriptionDrawer for Detergent and Conditioners Programme Knob Control PanelMain wash cycle for Cottons/Linen from 30 C to 95 C Draining of the water after a Rinse Hold without spinning Main wash programme for Delicates at 30 C or 40 CWOOL/SILK LAINE/SOIE, WOL/ZIJDE P Handwash Rinses, liquid additive washed in from compartment æ, spinShorter washing cycle for slightly dirty washing Programme Option ButtonsBefore the First Wash Consumption values and programme timesPull out the washing powder drawer slightly Sort and Prepare the Washing Prepare the Washing CycleTypes of washing and care symbols How much detergent and conditioner? Detergent and Conditioners Which detergent and conditioner?Water Softener Brief guide Performing a Wash CycleAfter the wash programme is complete Again Opening and Closing the DoorAdd the Washing Light indicate whether the door can be openedAdding detergent/conditioners If using liquid detergents/tabletsDetergents and conditioners For the appropriate pro Setting the washing programmePLEINE, Spoelstop comes on To change the Spin Speed for the final rinse orAccording to the wash programme Programme Progress Display Setting the delay timerStarting the Wash Programme Wash Programme ProgressSelecting a programme option Changing or cancelling the programmeChanging the washing programme Water is drained or the washing is spunAfter a Rinse Hold, the water must first be drained End of Wash Cycle/Removing the WashingWashing Programme TablesSeparate Spinning Separate RinsingWashing Detergent Drawer Cleaning and CareFilling Door Washing DrumWhat to do if Remedying FaultsTransit bolt/bars were As described Not removed Screw the inlet hose START/PAUSE OFF ARRET/UIT If foam is still visible after the final rinse If the washing result is not satisfactoryIf the washing is grey and limescale forms in the drum If there are still grey stains on the washingCarry Out an Emergency Emptying Operation Drain pump When all the washing solution has drained offHousing foreign objects are protected by the pump wheel Before cleaning the drain pumpInstructions for use To set the additional rinse cycles To cancel the additional rinse cyclesAdditional rinse cycles RINSE+/RINCAGE+, SPOELEN+ Helpful to rinse with extra waterSetting the Child Safety Feature Child Safety FeatureCancelling the Child Safety Feature Safety Instructions for Installation Setting up and connection instructionsTures Setting Up the UnitRemove the Transport Safeguard Transporting the UnitSupplied with the unit Special button a and the plug caps B 2 ea. and C 1 ea. areSetting Up on a Concrete Pedestal Prepare the Installation LocationSetting Up on a Vibrating floor Compensate for Floor Unevenness Water Connection Electrical ConnectionPermissible Water Pressure Water Inflow Water Drainage into a Siphon Water DrainageDraining the water into a basin Measurements in mm Technical DataDimensions Delivery Heads over 1mBelgium Guarantee conditionsGuarantee conditions Tel Fax Customer servicesPage Additives IndexWhen do you incur costs even during the warranty period? ServiceAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG