Electrolux 50550 manual End of Wash Cycle/Removing the Washing

Page 25

Instructions for use

End of Wash Cycle/Removing the Washing

When a wash cycle is completed, the END (FIN/EINDE) light on the Programme Progress Display comes on.

If RINSE HOLD (ARRET CUVE PLEINE/SPOELSTOP) was selected, the indi- cator lights DOOR (PORTE/DEUR) and END (FIN/EINDE) come on.

1.After a Rinse Hold, the water must first be drained:

Either turn the programme knob to OFF (ARRET/UIT), then to DRAIN (VIDANGE/POMPEN) and press the START/PAUSE (MARCHE/PAUSE, START/PAUZE) button (the water is drained without spinning),

or

turn the programme knob to OFF (ARRET/UIT), then to SPIN (ESSORAGE/CENTRIFUG.) and press the START/PAUSE (MARCHE/ PAUSE, START/PAUZE) button (the water is drained and the washing is

given a spin; the spin speed can be altered during the spin).

When this stage of the programme is completed, the END (FIN/EINDE) light comes on.

2.Opening the door.

The door can be opened after the DOOR (PORTE/DEUR) light goes off and the END (FIN/EINDE) light has come on.

3.Take out the washing.

4.Turn the programme knob to OFF (ARRET/UIT).

5.Close the stopcock.

6.After the wash cycle is completed, pull out the detergent/additives drawer slightly to allow it to dry. Leave the door slightly open to air the inside of the washing machine.

Attention! If the washing machine is not used for a long time: Close the water tap and disconnect the washing machine from the electricity mains.

25

Image 25
Contents Lavamat 50550 Electronic Dear customer Contents What to do if Setting up and connection instructionsPage Instructions for use SafetyBefore Putting into Operation for the First Time Correct UseGeneral Safety Child SafetyDispose the packing material DisposalFor polyoxymethylene, e.g. plastic clips Dispose the old applianceEnvironment Tips Front View Unit DescriptionDrawer for Detergent and Conditioners Programme Knob Control PanelMain wash cycle for Cottons/Linen from 30 C to 95 C WOOL/SILK LAINE/SOIE, WOL/ZIJDE P Handwash Main wash programme for Delicates at 30 C or 40 CRinses, liquid additive washed in from compartment æ, spin Draining of the water after a Rinse Hold without spinningShorter washing cycle for slightly dirty washing Programme Option ButtonsBefore the First Wash Consumption values and programme timesPull out the washing powder drawer slightly Sort and Prepare the Washing Prepare the Washing CycleTypes of washing and care symbols How much detergent and conditioner? Detergent and Conditioners Which detergent and conditioner?Water Softener Brief guide Performing a Wash CycleAfter the wash programme is complete Add the Washing Opening and Closing the DoorLight indicate whether the door can be opened AgainAdding detergent/conditioners If using liquid detergents/tabletsDetergents and conditioners For the appropriate pro Setting the washing programmePLEINE, Spoelstop comes on To change the Spin Speed for the final rinse orAccording to the wash programme Starting the Wash Programme Setting the delay timerWash Programme Progress Programme Progress DisplayChanging the washing programme Changing or cancelling the programmeWater is drained or the washing is spun Selecting a programme optionAfter a Rinse Hold, the water must first be drained End of Wash Cycle/Removing the WashingWashing Programme TablesSeparate Spinning Separate RinsingWashing Detergent Drawer Cleaning and CareFilling Door Washing DrumWhat to do if Remedying FaultsTransit bolt/bars were As described Not removed Screw the inlet hose START/PAUSE OFF ARRET/UIT If the washing is grey and limescale forms in the drum If the washing result is not satisfactoryIf there are still grey stains on the washing If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation Housing foreign objects are protected by the pump wheel When all the washing solution has drained offBefore cleaning the drain pump Drain pumpInstructions for use Additional rinse cycles RINSE+/RINCAGE+, SPOELEN+ To cancel the additional rinse cyclesHelpful to rinse with extra water To set the additional rinse cyclesSetting the Child Safety Feature Child Safety FeatureCancelling the Child Safety Feature Safety Instructions for Installation Setting up and connection instructionsRemove the Transport Safeguard Setting Up the UnitTransporting the Unit TuresSupplied with the unit Special button a and the plug caps B 2 ea. and C 1 ea. areSetting Up on a Concrete Pedestal Prepare the Installation LocationSetting Up on a Vibrating floor Compensate for Floor Unevenness Water Connection Electrical ConnectionPermissible Water Pressure Water Inflow Water Drainage into a Siphon Water DrainageDraining the water into a basin Dimensions Technical DataDelivery Heads over 1m Measurements in mmBelgium Guarantee conditionsGuarantee conditions Tel Fax Customer servicesPage Additives IndexWhen do you incur costs even during the warranty period? ServiceAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG