Electrolux 50550 Instructions for use, Safety, Before Putting into Operation for the First Time

Page 6

Instructions for use

Instructions for use

1Safety

The safety of AEG electrical appliances conforms to the recognised technical regulations and the legislation covering the safety of appli- ances. However, as manufacturers, we still regard it as our responsibility to inform you of the following safety information.

Before Putting into Operation for the First Time

Refer to the ”Installation and Connection Instructions” later in this user information.

When the unit is delivered in winter months with minus tempera- tures: Store the washing machine for 24 hours at room temperature before putting it into operation.

Correct Use

The washing machine is only designed for normal domestic washing. If the unit is used for purposes other than that for which it is de- signed, the manufacturer can accept no liability for any resulting damages.

For safety reasons, conversions or modifications to the washing ma- chine are not permissible.

Use only detergents which are suitable for washing machines. Follow the washing detergent manufacturer's instructions.

The washing must not contain any flammable solvents. Also remem- ber this when washing pre-cleaned washing.

Do not use the washing machine for chemical cleaning.

Dyes/dye removers may only be used in washing machines if the manufacturer expressly allows these products. We cannot be held lia- ble for any resulting damage.

Use only water from the water mains. Use rainwater or service water only if it meets the requirements outlined in DIN1986 and DIN1988.

Frost damage is not covered by the warranty! If the washing machine is in a room which is at risk from frost, an emergency emptying oper- ation must be carried out when there is a frost risk (see the section ”Carry Out Emergency Emptying”).

6

Image 6
Contents Lavamat 50550 Electronic Dear customer Contents Setting up and connection instructions What to do ifPage Before Putting into Operation for the First Time SafetyInstructions for use Correct UseChild Safety General SafetyFor polyoxymethylene, e.g. plastic clips DisposalDispose the packing material Dispose the old applianceEnvironment Tips Unit Description Front ViewDrawer for Detergent and Conditioners Control Panel Programme KnobMain wash cycle for Cottons/Linen from 30 C to 95 C Rinses, liquid additive washed in from compartment æ, spin Main wash programme for Delicates at 30 C or 40 CWOOL/SILK LAINE/SOIE, WOL/ZIJDE P Handwash Draining of the water after a Rinse Hold without spinningProgramme Option Buttons Shorter washing cycle for slightly dirty washingConsumption values and programme times Before the First WashPull out the washing powder drawer slightly Prepare the Washing Cycle Sort and Prepare the WashingTypes of washing and care symbols Detergent and Conditioners Which detergent and conditioner? How much detergent and conditioner?Water Softener Performing a Wash Cycle Brief guideAfter the wash programme is complete Light indicate whether the door can be opened Opening and Closing the DoorAdd the Washing AgainIf using liquid detergents/tablets Adding detergent/conditionersDetergents and conditioners Setting the washing programme For the appropriate proTo change the Spin Speed for the final rinse or PLEINE, Spoelstop comes onAccording to the wash programme Wash Programme Progress Setting the delay timerStarting the Wash Programme Programme Progress DisplayWater is drained or the washing is spun Changing or cancelling the programmeChanging the washing programme Selecting a programme optionEnd of Wash Cycle/Removing the Washing After a Rinse Hold, the water must first be drainedProgramme Tables WashingSeparate Rinsing Separate SpinningCleaning and Care Washing Detergent DrawerWashing Drum Filling DoorRemedying Faults What to do ifTransit bolt/bars were As described Not removed Screw the inlet hose START/PAUSE OFF ARRET/UIT If there are still grey stains on the washing If the washing result is not satisfactoryIf the washing is grey and limescale forms in the drum If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation Before cleaning the drain pump When all the washing solution has drained offHousing foreign objects are protected by the pump wheel Drain pumpInstructions for use Helpful to rinse with extra water To cancel the additional rinse cyclesAdditional rinse cycles RINSE+/RINCAGE+, SPOELEN+ To set the additional rinse cyclesChild Safety Feature Setting the Child Safety FeatureCancelling the Child Safety Feature Setting up and connection instructions Safety Instructions for InstallationTransporting the Unit Setting Up the UnitRemove the Transport Safeguard TuresSpecial button a and the plug caps B 2 ea. and C 1 ea. are Supplied with the unitPrepare the Installation Location Setting Up on a Concrete PedestalSetting Up on a Vibrating floor Compensate for Floor Unevenness Electrical Connection Water ConnectionPermissible Water Pressure Water Inflow Water Drainage Water Drainage into a SiphonDraining the water into a basin Delivery Heads over 1m Technical DataDimensions Measurements in mmGuarantee conditions BelgiumGuarantee conditions Customer services Tel FaxPage Index AdditivesService When do you incur costs even during the warranty period?AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG