Electrolux 1051 VI fele manual Programme Option buttons, Stain

Page 14

Description of the appliance

is then displayed. One minute after depressing the START/PAUSE but- ton, the machine starts its hourly countdown.

During the last hour, the remaining time is displayed every 5 minutes.

The delayed start function cannot be used with the SPIN or PUMP OUT programmes.

To alter or cancel the preset delay, press the START/PAUSE button, then press the DELAY START button until the required time is displayed or, if you wish to cancel the delay, until the symbol 0 h is displayed.

Then press the START/PAUSE button again.

When the delay is cancelled, the display shows the duration of the wash programme previously selected.

Programme Option buttons

Depending on the programme, different functions can be combined. These must be selected after choosing the desired programme and before depressing the START/PAUSE button.

When these buttons are pressed, the corresponding pilot lights come on. When they are pressed again, the pilot lights go out.

If an incorrect option is selected, the pilot lights flash for about 3 seconds and the message Err is displayed.

STAIN

To treat heavily soiled washing or stained washing with stain remover (extended main wash with time optimised stain action phase, not selec- table for wool or programmes with temperatures lower than 40°C).

QUICK

By pressing this button the washing time is reduced. For use when washing lightly soiled laundry.

This option is not available with the wool programme.

PREWASH

The machine performs a prewash cycle at 40°C max. The prewash cycle ends with a short spin in programmes for Cotton and Easy-cares, and with emptying of the water only for Delicates.

This option is not available with the wool programme. For use when washing heavily soiled laundry.

Important: the STAIN, PREWASH and QUICK WASH options cannot be

selected together: one automatically disables the others.

14

Image 14
Contents AUS Erfahrung GUT Dear customer Contents Programme charts Bulding-in Installation Safety instructionsGeneral safety Child safety During useMachine DisposalPackaging materials Tips for environmental protection Main features of your washing machine Description of the appliance Front viewControl panel Programme selector dialMains-on light Delay Start buttonON/OFF button START/PAUSE buttonProgramme Option buttons StainExtra Rinse DisplayCancelling a programme Programme progress displayAltering a programme which is running Opening the door after the programme has startedDetergent dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundryCotton Weight of laundryTypes of fabric and care labels Cotton 40Delicates Detergents and additives Which detergent?Which form? Traditional PowdersLoad the laundry How to washSwitching the machine on Add detergent and additiveSelection of the Extra Rinse and/or Rinse Hold option Selection of the desired wash programmeSelection of the spin speed Selection of the Delay Start option Starting the programmeAt the end of the programme Programme chart Wash programmesSpecial programmes Additional Max Duration DryAfter each wash Cleaning and maintenancePeriodical cleaning Exterior Detergent dispenser drawerDrain filter Water inlet filterFrost precautions Emergency emptying outTroubleshooting Something not working?Problem Noisy Feet have not been Problem Possible cause Solution Foam is still visible even after the last rinse Unsatisfactory washing resultsIf grey stains remain on the laundry White residue is left on the laundryTechnical data This appliance complies with the following EC directives0990 929 Service & Spare PartsService & Spare Parts Help us to help youCustomer care Guarantee Conditions European Guarantee Instructions for installation and electrical connection Safety instructions for the installerFront view and side view Rear viewInstallation UnpackingPositioning LevellingDo not connect to a hot water supply Water inlet cold water connection onlyWater drainage Interest of the environment Electrical connectionsPermanent connection Door Preparation and assembly of the doorBuilding-in HingesMounting the door Counter-magnetDrill four fixing holes see Fig. G See Fig. H With the appliance Installed adjust all four Page