Electrolux 1051 VI fele manual Altering a programme which is running

Page 17

Description of the appliance

Altering a programme which is running

To alter a programme, first set the machine to PAUSE by pressing the START/PAUSE button.

Before the machine starts the heating phase, i.e. within the first 15 minutes for cotton programmes, 10 minutes for easy-cares and delicate programmes and 5 minutes for the wool programme, the selected wash cycle can be modified.

Warning! If the programme selector dial is turned first to RESET and then to the new programme, the programme which is running is cancelled, the water is emptied out and the machine re-starts from water filling. To simply modify the programme which is running, turn the programme selector dial to the desired position (avoiding the RESET position): when the START/PAUSE button is pressed again, the machine restarts with the newly selected programme from the point at which it was interrupted.

Opening the door after the programme has started

The door can only be opened before the machine starts the heating phase (within the first 15, 10 or 5 minutes, depending on the pro- gramme selected - see paragraph above) and during the rinse phase.

Set the machine to PAUSE (by pressing the START/PAUSE button).

If the door does not open, this means that the machine is already heat- ing, or that the water level is above the bottom edge of the door.

This prevents water from spilling out when the door is opened.

17

Image 17

Contents AUS Erfahrung GUT Dear customer Contents Programme charts Bulding-in Installation Safety instructionsGeneral safety During use Child safetyMachine DisposalPackaging materials Tips for environmental protection Main features of your washing machine Front view Description of the applianceProgramme selector dial Control panelON/OFF button Delay Start buttonMains-on light START/PAUSE buttonStain Programme Option buttonsDisplay Extra RinseProgramme progress display Cancelling a programmeOpening the door after the programme has started Altering a programme which is runningBefore the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleTypes of fabric and care labels Weight of laundryCotton Cotton 40Delicates Which detergent? Detergents and additivesTraditional Powders Which form?Switching the machine on How to washLoad the laundry Add detergent and additiveSelection of the Extra Rinse and/or Rinse Hold option Selection of the desired wash programmeSelection of the spin speed Starting the programme Selection of the Delay Start optionAt the end of the programme Wash programmes Programme chartAdditional Max Duration Dry Special programmesPeriodical cleaning Exterior Cleaning and maintenanceAfter each wash Detergent dispenser drawerWater inlet filter Drain filterEmergency emptying out Frost precautionsSomething not working? TroubleshootingProblem Noisy Feet have not been Problem Possible cause Solution If grey stains remain on the laundry Unsatisfactory washing resultsFoam is still visible even after the last rinse White residue is left on the laundryThis appliance complies with the following EC directives Technical dataService & Spare Parts Service & Spare Parts0990 929 Help us to help youCustomer care Guarantee Conditions European Guarantee Safety instructions for the installer Instructions for installation and electrical connectionRear view Front view and side viewUnpacking InstallationLevelling PositioningDo not connect to a hot water supply Water inlet cold water connection onlyWater drainage Electrical connections Interest of the environmentPermanent connection Building-in Preparation and assembly of the doorDoor HingesCounter-magnet Mounting the doorDrill four fixing holes see Fig. G See Fig. H With the appliance Installed adjust all four Page