Electrolux 1051 VI fele manual Programme progress display, Cancelling a programme

Page 16

Description of the appliance

•delayed start, programmed using the special button (C).

The selected delay (19 hours max.) is indicated in the display. The countdown is updated every hour, and every 5 minutes during the last hour.

•Heating phase. A dot to the right of the figures in the display indi- cates that the machine is heating the water.

•Incorrect option selection. If an option which is not compatible with the set wash programme is selected, the message Err is displayed.

Programme progress display

By selecting the wash programme, the pilot lights cor- responding to the various phases making up the pro- gramme come on.

After the machine has started, only the running phase pilot light stays on. When the programme has finished, the END pilot light comes on.

PREWASH

WASH

RINSE

RINSE HOLD

PUMP OUT

SPIN

END

Cancelling a programme

To cancel a programme which is running, turn the programme selector dial to the RESET position: three flashing dashes will be displayed.

Warning! After a programme which ends with water in the drum (RINSE HOLD option), turn the selector dial first to RESET and then to the PUMP OUT programme.

16

Image 16

Contents AUS Erfahrung GUT Dear customer Contents Programme charts Bulding-in General safety Safety instructionsInstallation Child safety During usePackaging materials DisposalMachine Tips for environmental protection Main features of your washing machine Description of the appliance Front viewControl panel Programme selector dialDelay Start button ON/OFF buttonMains-on light START/PAUSE buttonProgramme Option buttons StainExtra Rinse DisplayCancelling a programme Programme progress displayAltering a programme which is running Opening the door after the programme has startedDetergent dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundryWeight of laundry Types of fabric and care labelsCotton Cotton 40Delicates Detergents and additives Which detergent?Which form? Traditional PowdersHow to wash Switching the machine onLoad the laundry Add detergent and additiveSelection of the spin speed Selection of the desired wash programmeSelection of the Extra Rinse and/or Rinse Hold option Selection of the Delay Start option Starting the programmeAt the end of the programme Programme chart Wash programmesSpecial programmes Additional Max Duration DryCleaning and maintenance Periodical cleaning ExteriorAfter each wash Detergent dispenser drawerDrain filter Water inlet filterFrost precautions Emergency emptying outTroubleshooting Something not working?Problem Noisy Feet have not been Problem Possible cause Solution Unsatisfactory washing results If grey stains remain on the laundryFoam is still visible even after the last rinse White residue is left on the laundryTechnical data This appliance complies with the following EC directivesService & Spare Parts Service & Spare Parts0990 929 Help us to help youCustomer care Guarantee Conditions European Guarantee Instructions for installation and electrical connection Safety instructions for the installerFront view and side view Rear viewInstallation UnpackingPositioning LevellingWater drainage Water inlet cold water connection onlyDo not connect to a hot water supply Interest of the environment Electrical connectionsPermanent connection Preparation and assembly of the door Building-inDoor HingesMounting the door Counter-magnetDrill four fixing holes see Fig. G See Fig. H With the appliance Installed adjust all four Page