Electrolux 1051 VI fele manual Instructions for installation and electrical connection

Page 43

Instructions for installation and electrical connection

Safety instructions for the installer

•This appliance is heavy, care should be taken when moving it.

•When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the retailer.

•All internal packing must be removed before using the appliance. Serious damage may be caused to the machine or adjacent furniture if the protective transit devices are not removed or are not completely removed. Refer to the relevant paragraph.

•Any electrical work required to install this appliance must be carried out by a qualified electrician.

•Any plumbing work required to install this appliance must be carried out by a qualified plumber.

•After having installed the machine, check that it is not standing on its electrical supply cable.

•If the appliance is placed on a carpeted floor, ensure that air can cir- culate freely between the adjustable feet and the floor.

•The installation should comply with local water authority and build- ing regulations requirements.

•Should the appliance power supply cable need to be replaced, this should be carried out by our Service Force Centre.

•This appliance should be connected to a cold water supply only.

43

Image 43

Contents AUS Erfahrung GUT Dear customer Contents Programme charts Bulding-in General safety Safety instructionsInstallation During use Child safetyPackaging materials DisposalMachine Tips for environmental protection Main features of your washing machine Front view Description of the applianceProgramme selector dial Control panelSTART/PAUSE button Delay Start buttonON/OFF button Mains-on lightStain Programme Option buttonsDisplay Extra RinseProgramme progress display Cancelling a programmeOpening the door after the programme has started Altering a programme which is runningBefore the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleCotton 40 Weight of laundryTypes of fabric and care labels CottonDelicates Which detergent? Detergents and additivesTraditional Powders Which form?Add detergent and additive How to washSwitching the machine on Load the laundrySelection of the spin speed Selection of the desired wash programmeSelection of the Extra Rinse and/or Rinse Hold option Starting the programme Selection of the Delay Start optionAt the end of the programme Wash programmes Programme chartAdditional Max Duration Dry Special programmesDetergent dispenser drawer Cleaning and maintenancePeriodical cleaning Exterior After each washWater inlet filter Drain filterEmergency emptying out Frost precautionsSomething not working? TroubleshootingProblem Noisy Feet have not been Problem Possible cause Solution White residue is left on the laundry Unsatisfactory washing resultsIf grey stains remain on the laundry Foam is still visible even after the last rinseThis appliance complies with the following EC directives Technical dataHelp us to help you Service & Spare PartsService & Spare Parts 0990 929Customer care Guarantee Conditions European Guarantee Safety instructions for the installer Instructions for installation and electrical connectionRear view Front view and side viewUnpacking InstallationLevelling PositioningWater drainage Water inlet cold water connection onlyDo not connect to a hot water supply Electrical connections Interest of the environmentPermanent connection Hinges Preparation and assembly of the doorBuilding-in DoorCounter-magnet Mounting the doorDrill four fixing holes see Fig. G See Fig. H With the appliance Installed adjust all four Page