Electrolux 1051 VI fele manual Safety instructions, General safety, Installation

Page 6

Safety instructions

Your safety is of paramount importance, please ensure you read this instruction book before installing or using this appliance.

General safety

Repairs to the machine must be carried out only by qualified person- nel. Repairs carried out by inexperienced persons could cause injury or serious malfunctioning. Contact your local AEG Service Force Centre.

Never start the machine if the mains cable is damaged or the control panel or worktop are damaged allowing inner components to be accessible.

Unplug the appliance before carrying out any cleaning or mainte- nance operations.

Never pull the mains cable to remove the plug from the socket; always take hold of the plug itself.

During high temperature wash programmes the door glass may get hot.

Let the water cool down before carrying out emergency emptying or before opening the door in an emergency.

Installation

Follow the installation instructions carefully.

Carry out a first wash without laundry (COTTONS 60, with half the amount of detergent) in order to remove any manufacturing residue from the tub and the drum.

6

Image 6
Contents AUS Erfahrung GUT Dear customer Contents Programme charts Bulding-in Safety instructions General safetyInstallation Child safety During useDisposal Packaging materialsMachine Tips for environmental protection Main features of your washing machine Description of the appliance Front viewControl panel Programme selector dialMains-on light Delay Start buttonON/OFF button START/PAUSE buttonProgramme Option buttons StainExtra Rinse DisplayCancelling a programme Programme progress displayAltering a programme which is running Opening the door after the programme has startedDetergent dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundryCotton Weight of laundryTypes of fabric and care labels Cotton 40Delicates Detergents and additives Which detergent?Which form? Traditional PowdersLoad the laundry How to washSwitching the machine on Add detergent and additiveSelection of the desired wash programme Selection of the spin speedSelection of the Extra Rinse and/or Rinse Hold option Selection of the Delay Start option Starting the programmeAt the end of the programme Programme chart Wash programmesSpecial programmes Additional Max Duration DryAfter each wash Cleaning and maintenancePeriodical cleaning Exterior Detergent dispenser drawerDrain filter Water inlet filterFrost precautions Emergency emptying outTroubleshooting Something not working?Problem Noisy Feet have not been Problem Possible cause Solution Foam is still visible even after the last rinse Unsatisfactory washing resultsIf grey stains remain on the laundry White residue is left on the laundryTechnical data This appliance complies with the following EC directives0990 929 Service & Spare PartsService & Spare Parts Help us to help youCustomer care Guarantee Conditions European Guarantee Instructions for installation and electrical connection Safety instructions for the installerFront view and side view Rear viewInstallation UnpackingPositioning LevellingWater inlet cold water connection only Water drainageDo not connect to a hot water supply Interest of the environment Electrical connectionsPermanent connection Door Preparation and assembly of the doorBuilding-in HingesMounting the door Counter-magnetDrill four fixing holes see Fig. G See Fig. H With the appliance Installed adjust all four Page