Electrolux 1051 VI fele Unsatisfactory washing results, If grey stains remain on the laundry

Page 37

Something not working?

Unsatisfactory washing results

If the laundry looks grey and lime scale is found in the drum

Too little detergent has been used.

An unsuitable detergent has been used.

Stubborn stains have not been treated prior to washing.

The programme/temperature has not been correctly selected.

If grey stains remain on the laundry

Laundry stained with ointments, grease or oil has been washed with an insufficient amount of detergent.

The temperature selected for the wash programme was too low.

Fabric softener - especially the concentrated type - has come into direct contact with the laundry. Wash these stains immediately and pour fabric softener carefully.

Foam is still visible even after the last rinse

Modern detergents often produce foam, even in the last rinse. How- ever the laundry has been completely rinsed.

White residue is left on the laundry

This is due to insoluble components in modern detergents and is therefore not the result of insufficient rinsing. Shake or brush the laundry. In future, it may be better to turn garments inside out before washing them. Check the choice of detergent; try using liquid deter- gents.

37

Image 37
Contents AUS Erfahrung GUT Dear customer Contents Programme charts Bulding-in General safety Safety instructionsInstallation During use Child safetyPackaging materials DisposalMachine Tips for environmental protection Main features of your washing machine Front view Description of the applianceProgramme selector dial Control panelON/OFF button Delay Start buttonMains-on light START/PAUSE buttonStain Programme Option buttonsDisplay Extra RinseProgramme progress display Cancelling a programmeOpening the door after the programme has started Altering a programme which is runningBefore the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleTypes of fabric and care labels Weight of laundryCotton Cotton 40Delicates Which detergent? Detergents and additivesTraditional Powders Which form?Switching the machine on How to washLoad the laundry Add detergent and additiveSelection of the spin speed Selection of the desired wash programmeSelection of the Extra Rinse and/or Rinse Hold option Starting the programme Selection of the Delay Start optionAt the end of the programme Wash programmes Programme chartAdditional Max Duration Dry Special programmesPeriodical cleaning Exterior Cleaning and maintenanceAfter each wash Detergent dispenser drawerWater inlet filter Drain filterEmergency emptying out Frost precautionsSomething not working? TroubleshootingProblem Noisy Feet have not been Problem Possible cause Solution If grey stains remain on the laundry Unsatisfactory washing resultsFoam is still visible even after the last rinse White residue is left on the laundryThis appliance complies with the following EC directives Technical dataService & Spare Parts Service & Spare Parts0990 929 Help us to help youCustomer care Guarantee Conditions European Guarantee Safety instructions for the installer Instructions for installation and electrical connectionRear view Front view and side viewUnpacking InstallationLevelling PositioningWater drainage Water inlet cold water connection onlyDo not connect to a hot water supply Electrical connections Interest of the environmentPermanent connection Building-in Preparation and assembly of the doorDoor HingesCounter-magnet Mounting the doorDrill four fixing holes see Fig. G See Fig. H With the appliance Installed adjust all four Page