Electrolux 1051 VI fele manual Extra Rinse, Display

Page 15

Description of the appliance

EXTRA RINSE

Can be used with all programmes except the wool programme. The machine performs 4 rinses instead of 3.

This option is recommended for people who are allergic to detergents and in areas where the water is very soft.

RINSE HOLD

When this button is pressed, the last rinse water is not emptied out, to prevent the fabrics from creasing. When the programme has finished, the corresponding pilot light on the programme progress display flashes to indicate that the water must be emptied out.

To empty out water:

press the START/PAUSE button: after emptying, the machine performs the spin cycle required for the type of wash selected;

select the PUMP OUT programme to empty out the water without spinning.

Warning! The programme selector dial must be turned first to RESET and then to programme “PUMP OUT”.

This option can also be selected for the wool programme: the last rinse water is emptied out but the machine does not spin.

If the water is not emptied out, the machine automatically empties itself after 18 hours.

SPIN SPEED

Press this button to reduce the maximum speed of the final speed proposed by the machine for the selected programme.

The maximum spin speed for cotton is 1000 rpm, for easy-cares and wool 900 rpm and for delicates 700 rpm.

Display

The display shows the following information:

if the programme selector dial is on the RESET position, three flashing dashes appear immediately after pressing the ON/OFF button to indicate that the machine is ready to receive instructions for the required wash programme;

duration of the selected wash programme, calculated automatically on the basis of the maximum recommended load for each type of fabric.

When the programme has finished, three flashing zeros are displayed;

15

Image 15
Contents AUS Erfahrung GUT Dear customer Contents Programme charts Bulding-in Safety instructions General safetyInstallation During use Child safetyDisposal Packaging materialsMachine Tips for environmental protection Main features of your washing machine Front view Description of the applianceProgramme selector dial Control panelSTART/PAUSE button Delay Start buttonON/OFF button Mains-on lightStain Programme Option buttonsDisplay Extra RinseProgramme progress display Cancelling a programmeOpening the door after the programme has started Altering a programme which is runningBefore the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleCotton 40 Weight of laundryTypes of fabric and care labels CottonDelicates Which detergent? Detergents and additivesTraditional Powders Which form?Add detergent and additive How to washSwitching the machine on Load the laundrySelection of the desired wash programme Selection of the spin speedSelection of the Extra Rinse and/or Rinse Hold option Starting the programme Selection of the Delay Start optionAt the end of the programme Wash programmes Programme chartAdditional Max Duration Dry Special programmesDetergent dispenser drawer Cleaning and maintenancePeriodical cleaning Exterior After each washWater inlet filter Drain filterEmergency emptying out Frost precautionsSomething not working? TroubleshootingProblem Noisy Feet have not been Problem Possible cause Solution White residue is left on the laundry Unsatisfactory washing resultsIf grey stains remain on the laundry Foam is still visible even after the last rinseThis appliance complies with the following EC directives Technical dataHelp us to help you Service & Spare PartsService & Spare Parts 0990 929Customer care Guarantee Conditions European Guarantee Safety instructions for the installer Instructions for installation and electrical connectionRear view Front view and side viewUnpacking InstallationLevelling PositioningWater inlet cold water connection only Water drainageDo not connect to a hot water supply Electrical connections Interest of the environmentPermanent connection Hinges Preparation and assembly of the doorBuilding-in DoorCounter-magnet Mounting the doorDrill four fixing holes see Fig. G See Fig. H With the appliance Installed adjust all four Page