Program sequence
The washer is equipped with fully electronic controls and load recognition. It automatically determines how much water is needed, based on the size and absorbency of the load. This means that program sequences and times can vary.
The program sequences listed here are based on the basic program, with a maximum load. Extra options have not been taken into account.
At any time during a program, you can check the display to see which step has been reached.
Special features in the program sequences:
To help prevent wrinkles, the washer drum will continue to turn at intervals for up to 30 minutes after program completion. Exceptions: In the Woolens program, there is no
The washer can be opened at any time.
1)For temperature selections from 60°C to 95°C a second rinse will take place. For temperature selections below 60°C there are 3 rinse cycles.
A third or fourth rinse cycle will occur if:
–there is heavy sudsing in the drum
–the final spin speed is less than 700 RPM
–No has been selected.
2)A third rinse cycle will occur if: No has been selected.
25