Installation and connection
Levelling the machine
To ensure safe and proper operation, the washer must stand perfectly level on all four feet.
Improper footing may increase water and power consumption, and may cause the washer to wander across the floor.
Screw out and adjust the feet
Use the four adjustable feet to level the washer. The washer is delivered with all four feet in the shortest (screwed in) position.
Use the combination wrench provided to turn the counternut 2 counterclockwise. Then turn the counter nut 2 together with the foot 1 to unscrew.
Use a level to check that the washer is standing square.
Hold the foot 1 securely with a pipe wrench. Now use the combination wrench to screw the counternut 2 firmly back up against the housing.
All four counternuts must be tightened firmly up against the housing. Be sure to also check this on the feet that did not require levelling. Otherwise, the washer may wander about.
47