Programmable functions
Standby display
To save energy, the display goes out and the Start/Stop button will start flashing slowly.
The display will always go out:
–if no program is selected within 10 minutes of switching on the machine.
–10 minutes after the end of a program.
Press any button to bring the display back on.
You can also set the display to fade out or remain visible while a program is running.
On
The standby function is activated. The display will fade out 10 minutes after the program has started.
Not in current Progr.
(Factory setting)
The standby function is not activated. The display remains visible while a program is running.
Memory
Whenever a program starts, the washing machine stores the most recently selected settings (program, temperature, spin speed/RPM and any extra options).
The next time the machine is switched on, the washer displays this stored information.
The factory setting for the memory function is Off.
Anti-crease
The
The washer drum will continue to rotate at intervals for up to 30 minutes after program completion.
You can open the washer at any time to remove the laundry.
On
(Factory setting)
The
Off
The
59