Changing a program sequence
Loading or removing laundry
Press the Door button until the front door opens.
Load or unload the laundry.
Close the door.
The program automatically proceeds.
Please note:
Once a program has started, the washer cannot detect changes to the size of the load.
Therefore, if laundry is added or removed, the washer will assume the maximum load.
The indicated program time may be extended.
The door will not open if:
–the suds are hotter than 55°C.
–the water level exceeds a certain limit.
–the program step Spin has been reached.
If you press the Door button during one of the above situations, the following message will appear in the display:
Door locked
Childproof lock
The childproof lock prevents the front door from being opened and programs from being interrupted.
Childproof feature ON
Once a program has started, press and hold the Start/Stop button
Stop or in 3 sec.
Hold down the Start/Stop button until the time has elapsed and the following appears in the display:
Locked
The childproof feature is now activated and will switch off automatically once the program has finished.
Childproof feature OFF
Once a program has started, press and hold the Start/Stop button
Unlock in 3 sec.
Hold down the Start/Stop button until the time has elapsed and the following appears in the display:
Unlocked
27