Spin cycles
Final spin cycle speed
Program | RPM |
Normal | 1200 |
Wrinkle Free | 1200 |
Delicates | 600 |
Woolens | 1200 |
Express | 1200 |
Colours | 1200 |
Dress Shirts | 600 |
Denim/Jeans | 900 |
Darks | 1200 |
Drain/Spin | 1200 |
You can reduce the final spin cycle speed. Exception: In the Normal program, the final spin cycle speed can only be reduced to 1000 RPM or above.
It is not possible to select a higher final spin cycle speed than indicated above.
Rinse cycle spins
The laundry is spun after the main wash and between the rinse cycles. If you reduce the final spin cycle speed, the rinse cycle spin speed is reduced along with it.
De-select final spin (Rinse hold)
Use the Spin speed button to select the Rinse hold feature. After the last rinse cycle, the laundry remains in the water. This helps reduce creasing if the laundry cannot be immediately removed from the drum upon program completion.
–Start the final spin:
The washer automatically offers you the highest possible spin speed. However, you can select a lower speed (RPM). Use the Start/Stop button to start the final spin.
–End the program:
Press the Door button. The water is pumped away. Next, press the Door button again to open the loading door.
De-select the rinse spin(s) and final spin (none )
Use the Spin speed button to select the none feature. After the last rinse cycle, the water is pumped away and wrinkle protection is activated. If this setting is used in the Wrinkle free,, Express or Colours programs, an extra rinse cycle will be added.
19