Miele W 1612 operating instructions Tap water line cold water, Hot water connection

Page 50

Installation and connection

This washer uses hot and cold household water.

The washer must always be connected to a tap water line (cold water, inlet hose with blue tag).

Tap water line (cold water)

The tap water connection is established using the inlet hose with the blue marking.

If the washer is connected to this line only, the appliance will need to be re- programmed to cold water fill only.

Please contact your Miele dealer or Miele Customer Service for reprogramming instructions.

The second unused inlet hose, with the red tag, will be attached to the rear of the washer after re-programming.

Hot water connection

The hot water connection is established using the inlet hose with the red marking.

Tips for the hot water connection

–The hot water temperature at the stopcock must not exceed 60°C, and the ideal temperature is 55°C.

–If the hot water inlet is closed, the washer will automatically switch over to tap water mode after a period of time. This safety feature is not intended for long-term use. The washer will continue to wash in hot water mode, which can lead to a poor wash result.

50

Image 50

Contents Operating instructions Washing machine 1612 Disposing of your old appliance Caring for the environmentDisposal of packing materials Contents Contents Technical data Children around the appliance Important safety instructionsProper use Technical safety Important safety instructions Accessories Operating the washing machine Control panelProgram duration Programmable functionsReminder to remove the shipping rods Before using for the first timeSetting the language Running the washer for the first timeEnergy and water consumption When drying with a tumble dryerEnvironmentally friendly use Detergent consumptionHow to wash correctly Brief instructionsSelect program Switch the washer on Load the washerSelect a temperature / spin speed Sensitive Select extra optionsShort Heavy SoilAdd detergent How to start a program Remove the laundry when the program is finishedSpin cycles Rinse cycle spinsDe-select the rinse spins and final spin none Final spin cycle speedProgram overview Denim/Jeans 60C to cold Colours Cold to 40CDress Shirts 60C to cold Darks 40C to coldExtra options Garment care label symbols Program sequence Main wash Rinse SpinSpecial features in the program sequences Interrupting a program Canceling a programChanging a program sequence Changing a programLoading or removing laundry Childproof feature onChildproof feature OFF Childproof lockUniversal Colour Delicates DetergentSelecting the right detergent Right amount to dispense will depend on the following Water softenerWashing with several components Fabric softener, fabric shaper, and liquid starch Dyes and dye removersCleaning the housing and control panel Cleaning and careCleaning the drum Cleaning the dispenser drawerCleaning the siphon and softener channel Cleaning the detergent drawer housingTo clean the filter in the water inlet valve Cleaning the water inlet filtersCleaning the filter in union of the inlet hose No wash program will start TroubleshootingWhat to do if Flashes Fault messages in the displayProblem Possible cause Remedy Display lights up Flashes Display lights upGeneral problems Unsatisfactory wash results Loading door cannot be opened with the Door button How to drain the washer Blocked drain outletOpening the loading door Warranty conditions and warranty period Customer serviceProgram updates PC Additional accessoriesInstallation and connection Front viewRear view Removing the transport fittings Installation surfaceTransporting the washer to the installation site Installation and connection Re-fitting the shipping rods Screw out and adjust the feet Levelling the machinePlease note Installing under a countertopWasher-dryer stack Connecting to the water supply Miele water protection systemTap water line cold water Hot water connectionDrainage system Drain hose connectionElectrical connection Electrical InstructionsTechnical data Programmable functions for changing Default settings Programmable functions LanguageSuds cooldown Water plusGentle wash Enter the code Pin codeTo activate the pin code To operate the washer with the pin codeKeypad tone Temperature unitBuzzer BrightnessAnti-crease Standby displayMemory Not in current ProgrSubject to change without notice Nr 264 960