Miele M.-Nr. 06 761 400 operating instructions Before using for the first time

Page 15

Before using for the first time

Before using the machine for the first time ensure that it is correctly installed and connected. See "Installation and connection". Also check that the drain filter is securely tightened. Otherwise there is a risk of water leakage during use.

For safety reasons spinning is not possible until the machine has been prepared for using for the first time. To activate the spinning function you must run a wash programme without laundry and without detergent.

Using detergent could result in an excessive build-up of foam.

This also activates the ball valve. The ball valve prevents detergent escaping from the suds container into the sump during a wash programme, thus making maximum use of the detergent.

^Open the stopcock.

^Press the I-On/0-Offbutton in.

^Turn the programme selector to Cottons 60°C.

^Press Start.

When this programme has finished turn the programme selector to Finish. Your washing machine is ready for using for the first time.

15

Image 15

Contents Operating instructions for Washing machine Prestige Plus Caring for our environment Disposal of the packing materialDisposal of your old appliance or machine Contents Contents Consumption data Technical data Correct application Safety with childrenTechnical safety Correct use Accessories Water plus system Description of the machineSpecial programmes Delicates and Silks / programmesTime left display Future updates PCControl panel Programme duration You can also omit the final spin Important control panel featuresSpin button with indicator lights Selecting the spin speed Additional option buttonsBefore using for the first time Detergent When drying with a tumble dryerWashing environmentally and economically Energy and water consumptionBrief instructions How to wash correctlyMinimum iron 30C to 60C Max. load 2.5 kg Programme chart Cottons 9ö8761 30C to 95C Max. load 5.0 kgDelicates 21ac1 Cold to 40C Max. load 1.0 kg Silks /c1 30C Max. load 1.0 kgWoollens2 /ac1 Cold to 40C Max. load 2.0 kg Separate rinse2 Max. load 5.0 kg Quick wash 40C Max. load 2.5 kgAutomatic 40C Max. load 3.0 kg Starch Max. load 5.0 kgIroning Garment care label symbols WashingProfessional cleaning DryingSort the laundry Before washingSelecting a programme Soak Additional options Select additional options if requiredShort Pre-washPress the Start button Adding detergentClose the drum door Switch off the washing machineAt the end of a programme Remove the laundryAdding or removing laundry after a programme has started Please noteDoor cannot be opened, if Skipping a programme stage To cancel or select a different programmeInterrupting a programme Altering a programme once selectedMain wash Rinses Spinning Programme sequenceSpecial features in the programme sequences Liquid detergent DetergentWater softeners Washing with several componentsAdding starch separately Fabric conditioners and liquid starchColour run and dye removers/ dyes Adding fabric conditioner separatelyExternal casing and fascia panel Cleaning and careCleaning the detergent dispenser drawer Cloth Extra cleaningDescaling the machine Cleaning the detergent dispenser drawer housingTo clean the filter in the water inlet valve Cleaning the water inlet filtersProblem solving guide Problem Possible cause RemedyProgramme does not start System has reacted Flashing Appears in the display Wash programme stops and a fault indicator light comes onProblem Possible cause Remedy a Water protection Call the Service DepartmentIndicator light is FlashesCheck light comes on General problems or an unsatisfactory wash result Grey, greasy Problem Possible cause Remedy Liquid detergentDoes not give Required resultDrum door does not open when you press the Door button Remove the lever Procedure for draining the machineUse it to open the access flap Blocked drain outletOpening the drum door Customer contact Optional accessoriesFront view Installation and connectionRear view Installation surface Installing the washing machineRemoving the transit bars Withdraw the transit bar Re-fitting the transit bars Levelling the machine Screwing out and adjusting the feetReplacing the lid Drain hose Electronic unit and washing machine housingMiele water protection system Inlet hoseMaintenance and care Connection to the water supplyExtension hose Drain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BSDuration Consumption dataTechnical data Page Programmable functions For changing standard settings Settings are as follows Programmable functionsWater plus system Programmable functions Follow steps a to G to programme and store in memory Gentle actionTop-up rinse for Cottons Memory Function Soak Page Page Alteration rights reserved/3007/Prestige Plus Nr 761 400