Miele M.-Nr. 06 761 400 operating instructions Problem solving guide, Programme does not start

Page 36

Problem solving guide

With the help of the following notes minor faults in the performance of the appliance, some of which may result from incorrect operation, can be put right without contacting the Service Department.

,Repair work to electrical appliances should only be carried out by a suitably qualified person in strict accordance with local and national safety regulations. Unauthorised repairs could be dangerous.

The programme does not start.

Problem	Possible cause		Remedy
The Anti-crease/Finish	There is no power.	Check that
indicator light is not		– the mains plug is plugged
on, or the Start			in and switched on.
indicator light is not		–	the fuse or circuit breaker
flashing.		–	the fuse or circuit breaker
flashing.			has not tripped.
			has not tripped.
		–	the drum door is closed
			properly.
The programme does	The washing machine	Prepare the machine as
not start when Drain/	has not been prepared	described in "Before using
Spin has been	for using for the first time.	for the first time".
selected.

36

Image 36

Contents Operating instructions for Washing machine Prestige Plus Caring for our environment Disposal of the packing materialDisposal of your old appliance or machine Contents Contents Consumption data Technical data Safety with children Correct applicationTechnical safety Correct use Accessories Description of the machine Special programmesDelicates and Silks / programmes Water plus systemFuture updates PC Time left displayControl panel Programme duration Important control panel features Spin button with indicator lights Selecting the spin speedAdditional option buttons You can also omit the final spinBefore using for the first time When drying with a tumble dryer Washing environmentally and economicallyEnergy and water consumption DetergentHow to wash correctly Brief instructionsProgramme chart Cottons 9ö8761 30C to 95C Max. load 5.0 kg Minimum iron 30C to 60C Max. load 2.5 kgDelicates 21ac1 Cold to 40C Max. load 1.0 kg Silks /c1 30C Max. load 1.0 kgWoollens2 /ac1 Cold to 40C Max. load 2.0 kg Quick wash 40C Max. load 2.5 kg Automatic 40C Max. load 3.0 kgStarch Max. load 5.0 kg Separate rinse2 Max. load 5.0 kgGarment care label symbols Washing Professional cleaningDrying IroningBefore washing Sort the laundrySelecting a programme Additional options Select additional options if required ShortPre-wash SoakAdding detergent Press the Start buttonSwitch off the washing machine At the end of a programmeRemove the laundry Close the drum doorAdding or removing laundry after a programme has started Please noteDoor cannot be opened, if To cancel or select a different programme Interrupting a programmeAltering a programme once selected Skipping a programme stageProgramme sequence Main wash Rinses SpinningSpecial features in the programme sequences Detergent Water softenersWashing with several components Liquid detergentFabric conditioners and liquid starch Colour run and dye removers/ dyesAdding fabric conditioner separately Adding starch separatelyCleaning and care Cleaning the detergent dispenser drawerCloth Extra cleaning External casing and fascia panelCleaning the detergent dispenser drawer housing Descaling the machineCleaning the water inlet filters To clean the filter in the water inlet valveProblem solving guide Problem Possible cause RemedyProgramme does not start Wash programme stops and a fault indicator light comes on Problem Possible cause Remedy aWater protection Call the Service Department System has reacted Flashing Appears in the displayIndicator light is FlashesCheck light comes on General problems or an unsatisfactory wash result Problem Possible cause Remedy Liquid detergent Does not giveRequired result Grey, greasyDrum door does not open when you press the Door button Procedure for draining the machine Use it to open the access flapBlocked drain outlet Remove the leverOpening the drum door Optional accessories Customer contactInstallation and connection Front viewRear view Installation surface Installing the washing machineRemoving the transit bars Withdraw the transit bar Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machineReplacing the lid Electronic unit and washing machine housing Miele water protection systemInlet hose Drain hoseMaintenance and care Connection to the water supplyExtension hose Connection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KConsumption data DurationTechnical data Page Programmable functions For changing standard settings Settings are as follows Programmable functionsWater plus system Programmable functions Gentle action Follow steps a to G to programme and store in memoryTop-up rinse for Cottons Memory Function Soak Page Page Alteration rights reserved/3007/Prestige Plus Nr 761 400