Miele M.-Nr. 06 761 400 Miele water protection system, Inlet hose, Drain hose

Page 52

Installation and connection

The Miele water protection system

The Miele water protection system protects the washing machine from water damage.

The system consists of three main components:

1)the inlet hose

2)the electronic unit and the washing machine housing

3)the drain hose

1)Inlet hose

The inlet hose can withstand pressure of more than 7,000 kPa.

2)Electronic unit and washing machine housing

Sump

Any leaking water is collected in a sump in the base of the machine. A float switches off the safety valves, preventing any more water flowing into the machine and water in the suds container is pumped away.

Overflow protection

This prevents the washing machine taking in too much water. If the water level exceeds a certain level, the drain pump switches in and pumps the excess water away.

3)Drain hose

The drain hose is protected by a ventilation system which prevents the washing machine from being emptied completely.

52

Image 52
Contents Operating instructions for Washing machine Prestige Plus Disposal of the packing material Caring for our environmentDisposal of your old appliance or machine Contents Contents Consumption data Technical data Safety with children Correct applicationTechnical safety Correct use Accessories Description of the machine Special programmesDelicates and Silks / programmes Water plus systemFuture updates PC Time left displayControl panel Programme duration Important control panel features Spin button with indicator lights Selecting the spin speedAdditional option buttons You can also omit the final spinBefore using for the first time When drying with a tumble dryer Washing environmentally and economicallyEnergy and water consumption DetergentHow to wash correctly Brief instructionsProgramme chart Cottons 9ö8761 30C to 95C Max. load 5.0 kg Minimum iron 30C to 60C Max. load 2.5 kgSilks /c1 30C Max. load 1.0 kg Delicates 21ac1 Cold to 40C Max. load 1.0 kgWoollens2 /ac1 Cold to 40C Max. load 2.0 kg Quick wash 40C Max. load 2.5 kg Automatic 40C Max. load 3.0 kgStarch Max. load 5.0 kg Separate rinse2 Max. load 5.0 kgGarment care label symbols Washing Professional cleaningDrying IroningBefore washing Sort the laundrySelecting a programme Additional options Select additional options if required ShortPre-wash SoakAdding detergent Press the Start buttonSwitch off the washing machine At the end of a programmeRemove the laundry Close the drum doorPlease note Adding or removing laundry after a programme has startedDoor cannot be opened, if To cancel or select a different programme Interrupting a programmeAltering a programme once selected Skipping a programme stageProgramme sequence Main wash Rinses SpinningSpecial features in the programme sequences Detergent Water softenersWashing with several components Liquid detergentFabric conditioners and liquid starch Colour run and dye removers/ dyesAdding fabric conditioner separately Adding starch separatelyCleaning and care Cleaning the detergent dispenser drawerCloth Extra cleaning External casing and fascia panelCleaning the detergent dispenser drawer housing Descaling the machineCleaning the water inlet filters To clean the filter in the water inlet valveProblem Possible cause Remedy Problem solving guideProgramme does not start Wash programme stops and a fault indicator light comes on Problem Possible cause Remedy aWater protection Call the Service Department System has reacted Flashing Appears in the displayFlashes Indicator light isCheck light comes on General problems or an unsatisfactory wash result Problem Possible cause Remedy Liquid detergent Does not giveRequired result Grey, greasyDrum door does not open when you press the Door button Procedure for draining the machine Use it to open the access flapBlocked drain outlet Remove the leverOpening the drum door Optional accessories Customer contactInstallation and connection Front viewRear view Installing the washing machine Installation surfaceRemoving the transit bars Withdraw the transit bar Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machineReplacing the lid Electronic unit and washing machine housing Miele water protection systemInlet hose Drain hoseConnection to the water supply Maintenance and careExtension hose Connection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KConsumption data DurationTechnical data Page Programmable functions For changing standard settings Programmable functions Settings are as followsWater plus system Programmable functions Gentle action Follow steps a to G to programme and store in memoryTop-up rinse for Cottons Memory Function Soak Page Page Alteration rights reserved/3007/Prestige Plus Nr 761 400