Miele M.-Nr. 06 761 400 Levelling the machine, Screwing out and adjusting the feet

Page 50

Installation and connection

Levelling the machine

The machine must stand perfectly level on all four feet to ensure safe and proper operation.

Incorrect installation may increase electricity and water consumption and may cause the machine to move about.

Screwing out and adjusting the feet

The four adjustable screw feet are used to level the machine. All four feet are screwed in when the machine is delivered.

^Using the spanner supplied turn counter nut 2 in a clockwise direction. Then turn counter nut 2 together with foot 1 to unscrew.

^Use a spirit level to check the machine is standing level.

^Hold foot 1 securely with a pipe wrench. Turn counter nut 2 again using the spanner supplied until it sits firmly up against the housing.

,All four counternuts must be firmly up against the housing. Please also check this for the feet which did not need adjustment. Otherwise there is the danger of the machine moving about.

50

Image 50

Contents Operating instructions for Washing machine Prestige Plus Disposal of your old appliance or machine Caring for our environmentDisposal of the packing material Contents Contents Consumption data Technical data Safety with children Correct applicationTechnical safety Correct use Accessories Delicates and Silks / programmes Description of the machineSpecial programmes Water plus systemFuture updates PC Time left displayControl panel Programme duration Additional option buttons Important control panel featuresSpin button with indicator lights Selecting the spin speed You can also omit the final spinBefore using for the first time Energy and water consumption When drying with a tumble dryerWashing environmentally and economically DetergentHow to wash correctly Brief instructionsProgramme chart Cottons 9ö8761 30C to 95C Max. load 5.0 kg Minimum iron 30C to 60C Max. load 2.5 kgWoollens2 /ac1 Cold to 40C Max. load 2.0 kg Delicates 21ac1 Cold to 40C Max. load 1.0 kgSilks /c1 30C Max. load 1.0 kg Starch Max. load 5.0 kg Quick wash 40C Max. load 2.5 kgAutomatic 40C Max. load 3.0 kg Separate rinse2 Max. load 5.0 kgDrying Garment care label symbols WashingProfessional cleaning IroningBefore washing Sort the laundrySelecting a programme Pre-wash Additional options Select additional options if requiredShort SoakAdding detergent Press the Start buttonRemove the laundry Switch off the washing machineAt the end of a programme Close the drum doorDoor cannot be opened, if Adding or removing laundry after a programme has startedPlease note Altering a programme once selected To cancel or select a different programmeInterrupting a programme Skipping a programme stageProgramme sequence Main wash Rinses SpinningSpecial features in the programme sequences Washing with several components DetergentWater softeners Liquid detergentAdding fabric conditioner separately Fabric conditioners and liquid starchColour run and dye removers/ dyes Adding starch separatelyCloth Extra cleaning Cleaning and careCleaning the detergent dispenser drawer External casing and fascia panelCleaning the detergent dispenser drawer housing Descaling the machineCleaning the water inlet filters To clean the filter in the water inlet valveProgramme does not start Problem solving guideProblem Possible cause Remedy Water protection Call the Service Department Wash programme stops and a fault indicator light comes onProblem Possible cause Remedy a System has reacted Flashing Appears in the displayCheck light comes on Indicator light isFlashes General problems or an unsatisfactory wash result Required result Problem Possible cause Remedy Liquid detergentDoes not give Grey, greasyDrum door does not open when you press the Door button Blocked drain outlet Procedure for draining the machineUse it to open the access flap Remove the leverOpening the drum door Optional accessories Customer contactInstallation and connection Front viewRear view Removing the transit bars Installation surfaceInstalling the washing machine Withdraw the transit bar Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machineReplacing the lid Inlet hose Electronic unit and washing machine housingMiele water protection system Drain hoseExtension hose Maintenance and careConnection to the water supply Connection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KConsumption data DurationTechnical data Page Programmable functions For changing standard settings Water plus system Settings are as followsProgrammable functions Programmable functions Gentle action Follow steps a to G to programme and store in memoryTop-up rinse for Cottons Memory Function Soak Page Page Alteration rights reserved/3007/Prestige Plus Nr 761 400