Miele M.-Nr. 06 761 400 operating instructions Re-fitting the transit bars

Page 49

Installation and connection

,To avoid the risk of injury the holes for the transit bars must be covered after the transit bars have been removed.

^Fit the covers on to the two holes. Then plug the holes as shown with the caps.

^Secure the transit bars to the back of the washing machine. Make sure that holes b are fitted over retainers a.

,The washing machine must not be moved without the transit bars in place.

Store the transit bars as shown or keep them in a safe place for future use. They must be re-fitted if the machine is to be moved again (e.g.when moving house).

Re-fitting the transit bars

Re-fitting is carried out by reversing the procedure.

49

Image 49
Contents Operating instructions for Washing machine Prestige Plus Disposal of the packing material Caring for our environmentDisposal of your old appliance or machine Contents Contents Consumption data Technical data Correct application Safety with childrenTechnical safety Correct use Accessories Special programmes Description of the machineDelicates and Silks / programmes Water plus systemTime left display Future updates PCControl panel Programme duration Spin button with indicator lights Selecting the spin speed Important control panel featuresAdditional option buttons You can also omit the final spinBefore using for the first time Washing environmentally and economically When drying with a tumble dryerEnergy and water consumption DetergentBrief instructions How to wash correctlyMinimum iron 30C to 60C Max. load 2.5 kg Programme chart Cottons 9ö8761 30C to 95C Max. load 5.0 kgSilks /c1 30C Max. load 1.0 kg Delicates 21ac1 Cold to 40C Max. load 1.0 kgWoollens2 /ac1 Cold to 40C Max. load 2.0 kg Automatic 40C Max. load 3.0 kg Quick wash 40C Max. load 2.5 kgStarch Max. load 5.0 kg Separate rinse2 Max. load 5.0 kgProfessional cleaning Garment care label symbols WashingDrying IroningSort the laundry Before washingSelecting a programme Short Additional options Select additional options if requiredPre-wash SoakPress the Start button Adding detergentAt the end of a programme Switch off the washing machineRemove the laundry Close the drum doorPlease note Adding or removing laundry after a programme has startedDoor cannot be opened, if Interrupting a programme To cancel or select a different programmeAltering a programme once selected Skipping a programme stageMain wash Rinses Spinning Programme sequenceSpecial features in the programme sequences Water softeners DetergentWashing with several components Liquid detergentColour run and dye removers/ dyes Fabric conditioners and liquid starchAdding fabric conditioner separately Adding starch separatelyCleaning the detergent dispenser drawer Cleaning and careCloth Extra cleaning External casing and fascia panelDescaling the machine Cleaning the detergent dispenser drawer housingTo clean the filter in the water inlet valve Cleaning the water inlet filtersProblem Possible cause Remedy Problem solving guideProgramme does not start Problem Possible cause Remedy a Wash programme stops and a fault indicator light comes onWater protection Call the Service Department System has reacted Flashing Appears in the displayFlashes Indicator light isCheck light comes on General problems or an unsatisfactory wash result Does not give Problem Possible cause Remedy Liquid detergentRequired result Grey, greasyDrum door does not open when you press the Door button Use it to open the access flap Procedure for draining the machineBlocked drain outlet Remove the leverOpening the drum door Customer contact Optional accessoriesFront view Installation and connectionRear view Installing the washing machine Installation surfaceRemoving the transit bars Withdraw the transit bar Re-fitting the transit bars Levelling the machine Screwing out and adjusting the feetReplacing the lid Miele water protection system Electronic unit and washing machine housingInlet hose Drain hoseConnection to the water supply Maintenance and careExtension hose Drain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BSDuration Consumption dataTechnical data Page Programmable functions For changing standard settings Programmable functions Settings are as followsWater plus system Programmable functions Follow steps a to G to programme and store in memory Gentle actionTop-up rinse for Cottons Memory Function Soak Page Page Alteration rights reserved/3007/Prestige Plus Nr 761 400