Miele M.-Nr. 06 761 400 Wash programme stops and a fault indicator light comes on

Problem solving guide

The wash programme stops and a fault indicator light comes on

Problem	Possible cause	Remedy A
The Check drain light	The water outlet is	Clean the drain filter and the
flashes. "– – –" appears	blocked.	drain pump as described in
in the display.		"Problem solving guide -
		Opening the drum door in
		the event of a blocked drain
		outlet and/or power failure".
	The drain hose has	The maximum delivery head
	been fixed too high.	is 1 m.
The Check inlet light	The water inlet is	Open the stopcock.
flashes. "– – –" appears	blocked.
in the display.	The filter in the water	Clean the filter.
	inlet hose is dirty.
The Check inlet and	The water protection	Call the Service Department.
Check drain lights are	system has reacted.
flashing. "– – –"
appears in the display.
The Soak/Pre-wash or	There is a fault.	Start the programme again.
Rinses indicator light is		If the fault indicators occur
flashing. "– – –"		again, contact the Service
appears in the display.		Department.

ATo switch off the fault indicator: switch the washing machine off with the I-On/0-Offbutton and turn the programme selector to Finish.

37