Miele M.-Nr. 06 761 400 operating instructions Electrical connection U.K, Non-rewireable plugs BS

Page 55

Installation and connection

Electrical connection U.K.

All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with current national and local safety regulations (BS 7671 in the UK).

Ensure power is not supplied to the appliance until after installation work has been carried out.

The appliance is supplied with a mains cable with moulded plug ready for connection to a 230-240V mains supply.

Please ensure the connection data quoted on the data plate match the household mains supply.

Connection should be made via a suitable switched socket which is easily accessible after installation.

For extra safety it is advisable to install a residual current device (RCD), with a trip current of 30 mA (in accordance with DIN VDE 0664, VDE 0100 Section 739).

Do not connect via an extension lead. Extension leads do not guarantee the required safety of the appliance (e.g. danger of overheating).

Non-rewireable plugs BS 1363

The fuse cover must be refitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is obtained. The colour of the correct replacement cover is that of the coloured insert in the base of the plug, or the colour that is embossed in words on the base of the plug (as applicable to the design of plug fitted).

Replacement fuses should be ASTA approved to BS 1362 and have the correct rating. Replacement fuses and fuse covers may be purchased from your local electrical supplier.

WARNING: THIS APPLIANCE MUST BE EARTHED

55

Image 55

Contents Operating instructions for Washing machine Prestige Plus Disposal of the packing material Caring for our environmentDisposal of your old appliance or machine Contents Contents Consumption data Technical data Correct application Safety with childrenTechnical safety Correct use Accessories Water plus system Description of the machineSpecial programmes Delicates and Silks / programmesTime left display Future updates PCControl panel Programme duration You can also omit the final spin Important control panel featuresSpin button with indicator lights Selecting the spin speed Additional option buttonsBefore using for the first time Detergent When drying with a tumble dryerWashing environmentally and economically Energy and water consumptionBrief instructions How to wash correctlyMinimum iron 30C to 60C Max. load 2.5 kg Programme chart Cottons 9ö8761 30C to 95C Max. load 5.0 kgSilks /c1 30C Max. load 1.0 kg Delicates 21ac1 Cold to 40C Max. load 1.0 kgWoollens2 /ac1 Cold to 40C Max. load 2.0 kg Separate rinse2 Max. load 5.0 kg Quick wash 40C Max. load 2.5 kgAutomatic 40C Max. load 3.0 kg Starch Max. load 5.0 kgIroning Garment care label symbols WashingProfessional cleaning DryingSort the laundry Before washingSelecting a programme Soak Additional options Select additional options if requiredShort Pre-washPress the Start button Adding detergentClose the drum door Switch off the washing machineAt the end of a programme Remove the laundryPlease note Adding or removing laundry after a programme has startedDoor cannot be opened, if Skipping a programme stage To cancel or select a different programmeInterrupting a programme Altering a programme once selectedMain wash Rinses Spinning Programme sequenceSpecial features in the programme sequences Liquid detergent DetergentWater softeners Washing with several componentsAdding starch separately Fabric conditioners and liquid starchColour run and dye removers/ dyes Adding fabric conditioner separatelyExternal casing and fascia panel Cleaning and careCleaning the detergent dispenser drawer Cloth Extra cleaningDescaling the machine Cleaning the detergent dispenser drawer housingTo clean the filter in the water inlet valve Cleaning the water inlet filtersProblem Possible cause Remedy Problem solving guideProgramme does not start System has reacted Flashing Appears in the display Wash programme stops and a fault indicator light comes onProblem Possible cause Remedy a Water protection Call the Service DepartmentFlashes Indicator light isCheck light comes on General problems or an unsatisfactory wash result Grey, greasy Problem Possible cause Remedy Liquid detergentDoes not give Required resultDrum door does not open when you press the Door button Remove the lever Procedure for draining the machineUse it to open the access flap Blocked drain outletOpening the drum door Customer contact Optional accessoriesFront view Installation and connectionRear view Installing the washing machine Installation surfaceRemoving the transit bars Withdraw the transit bar Re-fitting the transit bars Levelling the machine Screwing out and adjusting the feetReplacing the lid Drain hose Electronic unit and washing machine housingMiele water protection system Inlet hoseConnection to the water supply Maintenance and careExtension hose Drain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BSDuration Consumption dataTechnical data Page Programmable functions For changing standard settings Programmable functions Settings are as followsWater plus system Programmable functions Follow steps a to G to programme and store in memory Gentle actionTop-up rinse for Cottons Memory Function Soak Page Page Alteration rights reserved/3007/Prestige Plus Nr 761 400