Miele 05 536 980 operating instructions Programmable functions, Maximum water level

Page 31

Programmable functions

Programmable functions enable the user to introduce further features as required. They remain stored in memory until they are cancelled by the user.

Maximum water level

The water level for rinsing is automat- ically raised to the maximum level where rinse results are particularly important.

It is effective for the rinses in the follow- ing programmes:

-COTTONS

-MINIMUM IRON

-QUICK WASH

-MIXED WASH - Poly/Cottons

Before the "Maximum water level" pro- grammable function can be selected you must first select programming mode.

Selecting programming mode

AThe machine must be switched off and the drum door closed. The programme selector must point to Finish.

BPress the additional option buttons Short and Water plus at the same time and hold pressed in and:

C. . . switch the machine on with the I-ON/0-OFF-button.

DLet go of all these buttons.

The indicator light Main wash flashes in the sequence display.

Selecting the programmable function

To select the "Maximum water level" programmable function: turn the programme selector to -

MIXED WASH Poly/Cottons***.

Activating

To activate "Maximum water level" press the START button once.

The Rinses light comes on in the se- quence display.

Storing in memory

To store the "Maximum water level" pro- grammable function in the memory SWITCH the machine OFF with the I-ON/0-OFF button.

The "Maximum water level" programma- ble function is now stored in the ma- chine’s memory and is effective in the programmes described above until such time as you may wish to deacti- vate it.

Deactivating

To deactivate the use of a maximum water level in the rinses repeat the pro- cedure given above from point A as far as the *** shown above. Press the START button and the Rinses indicator light will go out. The function is now de- activated. Store in memory by pressing the I-ON/0-OFF button.

31

Image 31

Contents Premier Novo Disposal of the packing material Caring for our environmentDisposal of your old appliance Contents Contents Consumption data Technical Data Front view Guide to the machineControl panel Correct usage Technical safetyUse Disposal of your old machine AccessoriesWashing environmentally and economically Water hardness reminder dial Before using for the first timeFlushing out the machine Pre-treat the laundry How to wash correctlyBrief guide Before washing ASort the laundryTo start a programme GPress in the I-ON/0-OFF button Maximum load weights are noted be- lowBPress the Door button CLoad the drum EOpen the stopcock FAdd detergentKPress the Start button ISelect any additional option re- quiredJSelect a spin speed Memory-FunctionAt the end of a programme General exceptions Adding or removing washing after programme startSkipping a programme stage ProgrammeInterruption AlterationToo little has the following results Adding detergentIt is important to dispense the correct amount, because Water HardnessFabric conditioners, texturisers, liquid starch Adding detergent Water softenersStarching separately Separate fabric conditioner or texturiserProgramme selection ProgrammesProgrammes COTTONS1 Minimum Delicates Woollens IRON1 SequenceQuick Wash Starch Spin Select the appropriate temperature ac Tumble dry Important other care symbolsIroning Short Additional optionsSoak Pre-washWater plus Switching off the additional optionsSpin Electronic programme locking Switching on programme lockingSwitching off programme locking early To check if programme locking is switched onMaximum water level Programmable functionsOption Water plus systemSelecting the Options Activating the i compartment Woollens Cold Soak timeSelecting a different Soak time Woollens 40 C Activating Gentle actionStoring the programmable function in memory Top-up rinse for Cottons Deactivating the programmable func- tion Memory functionReactivating Cloth Cleaning and careCleaning the washing machine Extra cleaningCleaning the detergent dispenser drawer Cleaning the fluff drain filter and pump After cleaning To clean the filter in the water inlet valve To clean the water inlet filtersProgramme does not start Problem solving guideWash programme stops and a fault indicator light comes on Play FlashesCator light flashes Programme sequence disGeneral problems or an unsatisfactory wash result Tergent remain What to do if Possible cause Remedy Pump makesStrange noises Large residues of deThere are white res What to do if Possible cause Remedy Grey, greasy partiCles cling to Washed laundryTo check water pressure Opening the drum door in the event of a power failureCustomer contact After sales serviceFuture updates PC Appliance guaranteeRemoving the transit fitting InstallationInstallation surface InstallationRe-fitting the transit bars Levelling the machine Screwing out and adjusting the feetWasher and Dryer stack Building under a worktopConnection to water supply Drain hose connection Connection to the drainage systemElectrical connection U.K Electrical connection U.K Non-rewireable plugs BS Consumption data Technical Data Page Page Alteration rights reserved/3002