Problem solving guide
A fault indicator light comes on but the wash programme continues as normal.
What to do if ... | Possible cause | Remedy |
The Check drain light | The drain outlet is | Clean the fluff (drain) filter |
flashes. | restricted. | and drain pump. |
The Check inlet light | The water inlet is re- | – make sure the stopcock is |
flashes. | stricted or the water | opened wide enough. |
| pressure is too low. | – make sure the inlet hose is |
|
| not kinked. |
| The filter in the inlet | Clean the filter. |
| hose is dirty. |
|
The Drain/Final spin indi- | The final spin has | – Loosen and |
cator light flashes in the | not taken place. The | the washing. |
programme sequence dis- | machine detected | – Select the programme |
play. | an imbalance. | Spin or Drain. |
|
| – Take into account the spin |
|
| speed of the relevant |
|
| programme. |
The | The position of the programme selector was al- | |
dicator light flashes in the | tered after the start of the programme. Turn the | |
programme sequence dis- | programme selector back to the programme previ- | |
play. | ously chosen. |
|
46