Installation
Connection to water supply
The machine should be connected to a mains water supply in accordance with standard regulations. In Germany the washing machine is not required to have a
Connection to the mains water supply should incorporate a mains stopcock with 3/4’’ thread. The stopcock should be fitted by a qualified plumber.
The approx. 1.5 m long 3/8" pressure hose should be connected to the stop- cock via the 3/4" threaded union.
This pressure hose is not suitable for connection to a hot water supply. Please make sure the washer sits cor- rectly in the union.
The connection point is subject to mains water pressure. Turn on the stop- cock slowly and check for leaks.
If replacing the inlet hose only use a hose able to withstand pressure of at least 70 bar. This also applies to all fixtures and fittings used. Miele origi- nal parts fulfil this condition.
Longer hoses 2.5 or 4 metres in length are available as optional extras.
The machine is designed to operate with a water flow pressure of 1 bar mini- mum up to 10 bar maximum. The static water pressure must not exceed 10 bar. If it is higher than 10 bar it is essential to fit a reducer valve.
There is a minimum flow pressure of 1 bar pressure if 5 litres of water flow into a suitable container in 15 seconds.
The two dirt filters - one in the open end of the inlet hose, one at the inlet point in the solenoid valve must not be re- moved.
56