Programmable functions
Water plus system
The Water plus button offers four op- tions, increasing water level and / or bringing in an extra rinse cycle. To activate the option press the Water plus button when selecting your wash programme before pressing the START button.
Option 1
Increase in the rinse water level in the
COTTONS, MINIMUM IRON, QUICK WASH and MIXED WASH - Poly/Cottonsprogrammes, where for ex- ample rinse results are particularly im- portant.
Option 2
Increase in the water level in all stages of the COTTONS, MINIMUM IRON, QUICK WASH and MIXED WASH - Poly/Cottons programmes. It is particu- larly suitable for fabrics that need spe- cial care, or where extra attention must be given to dissolving detergent. This option is already set when the machine is delivered from the factory.
Option 3
An extra rinse cycle is introduced to the Cottons programme, e.g. when rinse re- sults are particularly important.
Option 4
Increase in the water level in all stages of the COTTONS, MINIMUM IRON, QUICK WASH and MIXED WASH - Poly/Cottons programmes and adds an extra rinse cycle to the COTTONS
programme, e.g. when rinse results are particularly important.
Before the "Water plus system" pro- grammable function can be selected you must first select programming mode.
Selecting programming mode
AThe machine must be switched off and the drum door closed. The programme selector must point to Finish.
BPress the additional option buttons Short and Water plus at the same time and hold pressed in and:
C. . . switch the machine on with the
DLet go of all these buttons.
The indicator light Main wash flashes in the sequence display.
Selecting the programmable function
To select the "Water plus system" pro- grammable function turn the programme selector to - Separate rinse. The indicator lights in the se- quence display correspond to the four options available. As Option 2 has been set at the factory, when the programme selector is turned Separate rinse, the in- dicator light for Option 2 Rinse hold will come on.
32