Programmable functions
Soak time
This is accessed for a programme by pressing the SOAK button on the fa- cia.
You can programme a soak time of:
-2 hours (factory setting) or
-1 hour 30 mins or
-1 hour or
-30 mins.
A "Soak time" of 2 hours is set at the factory. If you wish to change this stan- dard setting to one of the times listed above, you must first select program- ming mode.
Selecting programming mode
AThe machine must be switched off and the drum door closed. The programme selector must point to Finish.
BPress the additional option buttons Short and Water plus at the same time and hold pressed in and:
C. . . switch the machine on with the
DLet go of all these buttons.
The indicator light Main wash flashes in the sequence display.
Selecting the programmable function
To select the "Soak time" programmable function turn the programme selector to
-WOOLLENS Cold.
The Rinse indicator light comes on in the sequence display. This shows that a "Soak time" of 2 hours is currently se- lected (factory setting).
Selecting a different "Soak time"
By pressing the START button a various number of times you can select differ- ent soak times. To confirm that a differ- ent soak time has been selected, the previous indicator light goes out and a new indicator light comes on.
Each time START is pressed a different indicator light will come on. The indica- tor lights correspond to the 4 soak times available as follows:
2 hours = | Rinse |
1 hour 30 mins = Rinse hold | |
1 hour = | Drain\Spin |
30 mins = | Anti crease\Finish |
Storing in memory
When you have selected the soak time you require, SWITCH the machine OFF with the
The "Soak time" you have selected is now stored in the machine’s memory.
35