Miele 05 536 980 operating instructions Top-up rinse for Cottons

Page 37

Programmable functions

Top-up rinse for Cottons

At the end of the main wash addi- tional water flows into the drum to cool the suds down.

Hot suds can damage plastic drainage pipes.

Top-up rinse takes place when temper- atures of 95°C and 75°C are selected.

Top-up rinse should be activated:

–to prevent the danger of scalding if the drain hose is hooked over the edge of a sink or basin.

–where the drainage pipes do not comply with DIN 1986.

The washing machine is delivered with the "Top-up rinse for Cottons" deacti- vated.

Before the "Top-up rinse for Cottons" programmable function can be se- lected you must first select program- ming mode.

Selecting programming mode

AThe machine must be switched off and the drum door closed. The programme selector must point to Finish.

BPress the additional option buttons Short and Water plus at the same time and hold pressed in and:

C. . . switch the machine on with the I-ON/0-OFF-button.

DLet go of all these buttons.

The indicator light Main wash flashes in the sequence display.

Selecting the programmable function

To select the "Top-up rinse for Cottons" programmable function turn the programme selector to - DELICATES cold ***.

Activating

To activate "Top-up rinse for Cottons" press the START button once.

The Rinses light comes on in the se- quence display.

Storing in memory

To store the "Top-up rinse for Cottons" programmable function in the memory SWITCH the machine OFF with the I-ON/0-OFF button.

The "Top-up rinse for Cottons" program- mable function is now stored in the ma- chine’s memory.

Deactivating

If the "Top-up rinse for Cottons" pro- grammable function is no longer re- quired it can be deactivated. To do so repeat the procedure given above from point A as far as the *** shown above. Press the START button and the Rinses indicator light will go out. The function is now deactivated. Store in memory by pressing the I-ON/0-OFF button.

37

Image 37

Contents Premier Novo Disposal of the packing material Caring for our environmentDisposal of your old appliance Contents Contents Consumption data Technical Data Front view Guide to the machineControl panel Correct usage Technical safetyUse Disposal of your old machine AccessoriesWashing environmentally and economically Water hardness reminder dial Before using for the first timeFlushing out the machine Brief guide How to wash correctlyBefore washing ASort the laundry Pre-treat the laundryBPress the Door button CLoad the drum Maximum load weights are noted be- lowEOpen the stopcock FAdd detergent To start a programme GPress in the I-ON/0-OFF buttonJSelect a spin speed ISelect any additional option re- quiredMemory-Function KPress the Start buttonAt the end of a programme General exceptions Adding or removing washing after programme startInterruption ProgrammeAlteration Skipping a programme stageIt is important to dispense the correct amount, because Adding detergentWater Hardness Too little has the following resultsFabric conditioners, texturisers, liquid starch Adding detergent Water softenersStarching separately Separate fabric conditioner or texturiserProgramme selection ProgrammesProgrammes COTTONS1 Minimum Delicates Woollens IRON1 SequenceQuick Wash Starch Spin Select the appropriate temperature ac Tumble dry Important other care symbolsIroning Soak Additional optionsPre-wash ShortWater plus Switching off the additional optionsSpin Switching off programme locking early Switching on programme lockingTo check if programme locking is switched on Electronic programme lockingMaximum water level Programmable functionsOption Water plus systemSelecting the Options Activating the i compartment Woollens Cold Soak timeSelecting a different Soak time Woollens 40 C Activating Gentle actionStoring the programmable function in memory Top-up rinse for Cottons Deactivating the programmable func- tion Memory functionReactivating Cleaning the washing machine Cleaning and careExtra cleaning ClothCleaning the detergent dispenser drawer Cleaning the fluff drain filter and pump After cleaning To clean the filter in the water inlet valve To clean the water inlet filtersProgramme does not start Problem solving guideWash programme stops and a fault indicator light comes on Cator light flashes FlashesProgramme sequence dis PlayGeneral problems or an unsatisfactory wash result Strange noises What to do if Possible cause Remedy Pump makesLarge residues of de Tergent remainCles cling to What to do if Possible cause Remedy Grey, greasy partiWashed laundry There are white resTo check water pressure Opening the drum door in the event of a power failureFuture updates PC After sales serviceAppliance guarantee Customer contactInstallation surface InstallationInstallation Removing the transit fittingRe-fitting the transit bars Levelling the machine Screwing out and adjusting the feetWasher and Dryer stack Building under a worktopConnection to water supply Drain hose connection Connection to the drainage systemElectrical connection U.K Electrical connection U.K Non-rewireable plugs BS Consumption data Technical Data Page Page Alteration rights reserved/3002