Installation
Building under a worktop
^A special building under conversion kit* is required which includes a cover plate to replace the machine’s lid.
^Fitting instructions are supplied with the conversion kit.
N.B. Cover plate
The cover plate must be fitted in place of the machine’s lid to ensure electrical safety . However, if you wish to push your machine under a worktop and there is space to do this without re- moving the lid, the conversion kit is not necessary. Otherwise the conversion kit is essential.
^For installation under a work surface 900/910 mm from the floor, a raising kit* is also required.
^To ensure electrical safety the con- version kit and raising kit must be fit- ted by a suitably qualified installer.
^Connections for electricity, water and drainage should be installed in such a way that they remain accessible when the machine is in place.
Washer and Dryer stack
A Miele tumble dryer can be stacked with the washing machine. A WTV stacking kit* is necessary and can be purchased from the Miele Spare Parts Department.
*All parts marked with a * are available from the Miele Spare Parts or Sales De- partment, and must be fitted by a suit- ably competent person according to the instructions supplied with the kit.
55