Installation
Levelling the machine
The machine must stand perfectly level on all four feet to ensure safe and proper operation.
Incorrect installation may increase elec- tricity and water consumption and may cause the machine to move about.
The four adjustable screw feet are used to level the machine. All four feet are screwed in when the machine is deliv- ered.
Screwing out and adjusting the feet
^Gently tip the machine and prop it up using a solid wooden wedge for ex- ample, to ensure stability.
Make sure the machine does not slip as this could cause injury.
^With a screwdriver loosen and turn the foot 1 together with the counternut 2 to the left, (see illustra- tion below) and screw out.
^Put the machine back on all four feet.
^Use a spirit level to check the ma- chine is standing level.
^Hold the foot 1 firm using a pipe wrench and turn the counternut 2 to the right firmly up against the housing with a screwdriver.
All four counternuts must be firmly up against the housing. Please also check this for the feet which did not need adjustment. Otherwise there is the danger of the machine moving about.
54