Hamilton Beach 10092 manual To Change Voltage, To Dry Iron, To Steam Iron

840195501 ENv02.qxd:840124300 ENv02.qxd 11/19/10 9:38 AM Page 6

To Change Voltage

Make sure the unit is unplugged.

•For 120 volts: Slide switch to the right.

•For 240 volts: Slide switch to the left. If using 240 volts, you must use an appropriate adapter plug.

NOTICE: Damage to unit and garments may occur if unit is operated at 240V with switch set to 120V.

To Dry Iron

1.With travel iron/steamer unplugged, pull up the handle until it locks into position.

2.Make sure Dual-Voltage Switch is set to correct voltage and then plug travel iron/steamer into power supply.

3.Slide Steam Switch to the (Dry Iron) position. This will also prevent water leakage.

4.Turn Temperature Control Dial to desired

temperature. With travel iron/steamer resting on heel rest, allow 3 minutes for travel iron/steamer to reach desired temperature. Do not preheat travel iron/ steamer with soleplate facing down.

5. To turn travel iron/steamer off, turn Temperature Control Dial to O (OFF).

6.Unplug travel iron/steamer and allow to cool completely. Press the Handle Release/Lock Button (labeled PUSH on heel rest of iron) and push the handle down until it locks into the storage position. Place travel iron/steamer in storage bag.

To Steam Iron

1.With travel iron/steamer unplugged, pull up the handle until it locks into position.

2.Remove Water Tank Plug. Slowly pour 2 ounces (60 ml) of tap water into water tank opening up to the MAX Fill Indicator. Replace Water Tank Plug.

3.Make sure Dual-Voltage Switch is set to correct voltage and then plug travel iron/steamer into power supply.

4.Turn Temperature Control Dial to desired temperature. With travel iron/steamer resting on heel rest, allow 3 minutes for travel iron/steamer to reach desired temperature. Do not pre- heat travel iron/steamer with soleplate facing down.

5.Slide Steam Switch to the (Steam) position.

6.For steam burst, press Steam Button on handle.

7.To turn travel iron/steamer off, turn Temperature Control Dial to O (OFF).

8.Unplug travel iron/steamer. Empty water from the travel iron/ steamer water tank following directions in “Caring for Your

Travel Iron/Steamer.” Set Steam Switch to (Dry Iron) position.

9.Allow to cool completely. Press the Handle Release/Lock Button (labeled PUSH on heel rest of iron) and push the handle down until it locks into the storage position. Place travel iron/ steamer in storage bag.

6 7