Cabletron Systems EMM-E6 manual Perform a second visual inspection of the module

Chapter 3: Installation

3.Carefully remove the module from the shipping box. Leave the module inside its non-conductive bag until you are ready to install it.

4.Visually inspect the non-conductive bag. If there are any signs of damage, contact Cabletron Systems Technical Support immediately.

5.Place the static grounding strap properly upon your wrist before opening the non-conductive bag.

6.Open the non-conductive bag by tearing the black and yellow tape seal.

Do not cut the bag open, as damage to the EMM-E6 may

!result.

C AUT IO N

7. Perform a second visual inspection of the module.

3-2 EMM-E6 Installation Guide