Cabletron Systems EMM-E6 manual Installation

Installation

NOTE

Any installation operations must be performed only by qualified personnel.

We recommend powering down your MMAC when inserting or removing modules, even though Cabletron Systems modules have “hot swap” capabilities.

1.Power down the MMAC.

2.Remove any safety bars that protect the chassis and remove the module to be replaced or blank MMAC slot covers, in accordance with the installation and removal procedures for these items.

3.Slide the EMM-E6 into slots 1 and 2 of the MMAC as shown below.

1926n07

Module Guide Channels

4.Secure the module by tightening the knurled knobs at the top and bottom of the module.

5.Replace the safety bars on the MMAC chassis.

6.Power on the MMAC chassis.