Cabletron Systems EMM-E6 manual Chapter Troubleshooting, Using Lanview Leds

CHAPTER 4

TROUBLESHOOTING

This chapter provides diagnostic and troubleshooting information.

4.1USING LANVIEW LEDS

The EMM-E6 uses the Cabletron Systems built-in visual diagnostic and status monitoring system called LANVIEW. With LANVIEW, you can quickly scan the EMM-E6 LEDs to observe network status or diagnose network problems.

NOTE

The STBY, RCV, XMT, and CLN LEDs are in a matrix, which provides these indicators for four of the EMM-E6 Ethernet channels. To read the LEDs, the vertical column indicates the interface or channel the LED designates, while the horizontal row denotes the condition or statistic being monitored.

	Table 4-1 LANVIEW LED Messages
LED	Color	Description	Error Condition/
			Recommended Action
			If the LED is not lit, the
	Green	Normal operation.	EMM-E6 may not be
	(Flashing)		receiving power. See the
			Troubleshooting Checklist.
			Press the Reset switch on
CPU			the EMM-E6 front panel to
			re-initialize the board. This
	Red	CPU error condition.	may clear the error. If the
			board does not re-initialize, it
			has probably failed. Call
			Cabletron Systems Technical
			Support.

EMM-E6 Installation Guide 4-1