Alliance Laundry Systems UVN255P, SVN255P installation instructions Washer location. Conditions

Page 14

Transportation and location

14

 

 

2.3.Washer location. Conditions

ATTENTION!

THIS WASHERS MACHINE IS A SOFT-MOUNTED MACHINES AND THE STRESS TRANSMITTED TO THE FLOOR IS LOW. HOWEVER, THEIR WEIGHT IS CONSIDERABLE.

INSTALL THE WASHER ON A SECURE BASE CAPABLE OF SUSTAINING THE WASHER’S WEIGHT. REFER TO STRENGTH REQUIREMENTS TABLE (section 3.3).

INSTALLATION ON NON SOLID GROUNDS AND UPPER FLOORS

Do not install the machines on suspended floors or above ground level without obtaining approval from the appropriate qualified technician (structural engineer for building safety and noise transmission).

See floor static & dynamic strength requirements on INSTALLATION SPECIFICATIONS (section 1.4). In these installations, the manufacturer declines all responsibility for possible damages caused by vibrations in the building structures.

The floor where the washer is to be placed must be completely flat (see measures for the washer in INSTALLATION SPECIFICATIONS section 1.4).

Respect the ENVIRONMENTAL CONDITIONS indicated in INSTALLATION SPECIFICATIONS (section 1.4) which refer to the working and maintenance areas; they are necessary for the comfortable use and easy maintenance of the washer.

Do not install the washer in improper vented areas. Due to the products used during washing, washers may emanate vapours and gases which, in high concentrations, can be harmful for your health.

TO REDUCE VIBRATION AND SOUND AND TO ENSURE THAT THE MACHINE IS CORRECTLY BALANCED, IT IS ESSENTIAL THAT THE FOUR BASE LEGS OF THE WASHING MACHINE REST UNIFORMLY UPON THE FLOOR. DO NOT PLACE ANY TYPE OF ANTI-VIBRATORY DEVICE BETWEEN THE WASHER AND THE FLOOR.

NEVER INSTALL THE WASHER OVER AREAS BUILT WITH COMBUSTIBLE MATERIAL.

IF WASHERS ARE INSTALLED ON METALLIC SURFACES, AN ELECTRICAL CONDUCTOR INDEPENDENT TO THE WASHER GROUND MUST GROUND THESE SURFACES.

Specific warning for machines in USA /CANADA INSTALLATIONS.

In order to reduce fire risk, this machine must be installed in a concrete floor without any surface treatment.

WARNING!

Due to design requirements, the dosing dispenser of the washer is located at a height of more than 60 inch (1500 mm).

When introducing the chemical washing products in the dispenser, there is a risk, increased for users of low height, to receive spattering.

As protection, it is essential to install an auxiliary platform to provide easy access and with a non-slip surface.

 

Cod. G522433

© Copyright 2009, Alliance Laundry System LLC – DO NOT COPY OR TRANSMIT

Rev. 00/0510

Page 13 Page 15
Image 14
Page 13 Page 15
Contents SVN255P UVN255P1520001 Serial # Shipping dateSafety Instructions Do not try to open the washer’s door if the drum is movingSafety Instructions Electric risk High temperature risk Replacement PartsCustomer Service Copyright 2009, Alliance Laundry System LLC∙ Epdm and NBR Reason for which only Original Spare Parts Must be UsedIndex Index Technical InformationTechnical Information Necessary tools for installationMachine accessories Technical InformationGeneral specifications Installation SpecificationsMachine connections Connections Electrical requirements Brackets specific values for USA / CanadaTransport of machine Transportation and locationTransportation and Location Transporting crated machinesReleasing the security lock Installation on NON Solid Grounds and Upper Floors Washer location. ConditionsInstalling more than one washer Location specifications figRemoval of shipping braces Tilt ModelsTransportation and location Drain Installation18Installation A. Drain to the drain box Most recommended optionSiphonage Contamination Prevention Installation19Water inlets Installation20 Electrical requirements Previous requirements Installation21Installation characteristics ConductorMachine electrical connection Installation22PE/GND Steam connection Installation23Installation characteristics Steam connection in Tilt models Installation24Connection of the machine to the steam installation fig External dosing Installation25Compressed air connection figure External dosing equipment connection to the washerOnce the conductor connection is done, Replace Installation26Use of four dosing signals Lock the Covers Correctly Potential Free Relay ContactsInstallation27 Relay Contacts Powered from the Washer Control CircuitDosing Installation28Signal BoardInstallation External dosing hoses connectionSpecific verification of Tilt models Installation30Initial start-up Tilt models Tilt ModelsWater inlet installation proposal MaxParts of the tilt system assembly Tilt system assemblyAssembly Instructions for the Tilt System Accessories Tools to assemble the tilt systemTilt hinge assembly Position detectors assembly and adjustment figure Assembling Tilt system guards figure

SVN255P, UVN255P specifications

Alliance Laundry Systems has long been recognized for its commitment to innovation and quality in the laundry industry, and the launch of the UVN255P and SVN255P models reinforces this reputation. Designed primarily for commercial laundry applications, these units bring robust performance, efficiency, and advanced technology to heavy-duty environments.

At the core of the UVN255P and SVN255P models is their impressive washing capacity. With a significant load size capability, these machines are perfect for laundromats, hotels, and other high-demand facilities, enabling operators to process more laundry in less time. This capacity not only enhances productivity but also optimizes labor costs, allowing for greater operational efficiency.

One standout feature of both models is their user-friendly control interface. The intuitive controls are designed to simplify operation, minimizing the learning curve for new users. Alongside this, the machines offer programmable cycles that can be tailored to suit various fabrics and cleaning requirements. This flexibility ensures that the laundry process is not only efficient but also maintains the integrity of delicate items, as the right settings can be applied with ease.

Energy efficiency is another hallmark of the UVN255P and SVN255P. Both models are engineered to reduce water and energy consumption, aligning with sustainability goals that are increasingly important in today’s business environment. As a result, these machines not only contribute to a lower carbon footprint but also promise significant savings on utility bills, ultimately enhancing profitability for businesses.

Durability is also a key characteristic of these models, crafted with robust materials that withstand the rigors of constant use in commercial settings. The stainless steel construction not only ensures longevity but also makes maintenance simpler and quicker, minimizing downtime for facilities reliant on continued operation.

Furthermore, both models incorporate advanced technology features such as real-time performance monitoring and diagnostic tools. These capabilities allow operators to troubleshoot issues swiftly, reduce machine downtime, and maintain optimal performance levels.

In summary, the Alliance Laundry Systems UVN255P and SVN255P stand out in the commercial laundry market due to their high capacity, energy efficiency, user-friendly controls, and durable build. These features come together to provide businesses with a powerful solution that meets the demanding needs of modern laundry operations, ensuring that they can deliver high-quality service to their customers with confidence.
Top Page Image Contents