Alliance Laundry Systems SVN255P, UVN255P Position detectors assembly and adjustment figure

Page 35

Tilt system assembly

35

 

 

5.5.Pneumatic actuators assembly (figure 33) The arrow indicates the front of the machine.

The pneumatic actuators, together with the supporting plates and the beams are delivered mounted in two equal assemblies A.

Steps to assemble them to the washer:

∙ To determinate the position of each of the two beams/actuator assemblies, take as a reference the two pneumatic actuator limit switches B.

∙ Place both assemblies of beams and actuators under the machine; before doing so, disassemble the two actuator limit switches B. Before disassembly, note position of the screws, separators, washers and nuts.

∙ Assemble the beams and the fixed frame. Position of screws in figure 33. Use both central screws on the left side to also secure the support plates D of the electrical installation.

∙ Connect the nylon pipes to the pneumatic fittings E. The fittings may be oriented to facilitate connection.

fig. 33

Position of mounting screws of the pneumatic actuators to the fixed frame (side view).

Elements of figure 42. A: Side of fixed frame B: Support beams C: Screw

D: Nut

E: Washers

Important!

The nominal tightening torque of screws M14 is 434lb. inch (5 kg.m.). If this pressure is exceeded beams may be deformed.

Re-assemble the pneumatic actuator limit switches B (figure 43).

ATTENTION!

fig. 34

Limit switches are safety devices. Check that they are properly assembled.

5.6.Position detectors assembly and adjustment (figure 43).

The position detectors A are disassembled to prevent them from being damaged during transportation. Secure them to the supports, refer to figure 43. Mounting screws: M6x15.

fig. 35

 

Cod. G522433

© Copyright 2009, Alliance Laundry System LLC – DO NOT COPY OR TRANSMIT

Rev. 00/0510

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Serial # Shipping date UVN255P1520001 SVN255PDo not try to open the washer’s door if the drum is moving Safety InstructionsSafety Instructions Copyright 2009, Alliance Laundry System LLC Replacement PartsCustomer Service Electric risk High temperature riskReason for which only Original Spare Parts Must be Used ∙ Epdm and NBRIndex Technical Information IndexTechnical Information Necessary tools for installationMachine accessories Technical InformationInstallation Specifications General specificationsMachine connections Connections Brackets specific values for USA / Canada Electrical requirementsTransporting crated machines Transportation and locationTransportation and Location Transport of machineReleasing the security lock Washer location. Conditions Installation on NON Solid Grounds and Upper FloorsLocation specifications fig Installing more than one washerTilt Models Removal of shipping bracesTransportation and location A. Drain to the drain box Most recommended option Installation18Installation DrainSiphonage Contamination Prevention Installation19Water inlets Installation20 Conductor Installation21Installation characteristics Electrical requirements Previous requirementsMachine electrical connection Installation22PE/GND Steam connection Installation23Installation characteristics Steam connection in Tilt models Installation24Connection of the machine to the steam installation fig External dosing equipment connection to the washer Installation25Compressed air connection figure External dosingLock the Covers Correctly Potential Free Relay Contacts Installation26Use of four dosing signals Once the conductor connection is done, ReplaceRelay Contacts Powered from the Washer Control Circuit Installation27Board Installation28Signal DosingExternal dosing hoses connection InstallationSpecific verification of Tilt models Installation30Initial start-up Tilt Models Tilt modelsMax Water inlet installation proposalTools to assemble the tilt system Tilt system assemblyAssembly Instructions for the Tilt System Accessories Parts of the tilt system assemblyTilt hinge assembly Position detectors assembly and adjustment figure Assembling Tilt system guards figure

SVN255P, UVN255P specifications

Alliance Laundry Systems has long been recognized for its commitment to innovation and quality in the laundry industry, and the launch of the UVN255P and SVN255P models reinforces this reputation. Designed primarily for commercial laundry applications, these units bring robust performance, efficiency, and advanced technology to heavy-duty environments.

At the core of the UVN255P and SVN255P models is their impressive washing capacity. With a significant load size capability, these machines are perfect for laundromats, hotels, and other high-demand facilities, enabling operators to process more laundry in less time. This capacity not only enhances productivity but also optimizes labor costs, allowing for greater operational efficiency.

One standout feature of both models is their user-friendly control interface. The intuitive controls are designed to simplify operation, minimizing the learning curve for new users. Alongside this, the machines offer programmable cycles that can be tailored to suit various fabrics and cleaning requirements. This flexibility ensures that the laundry process is not only efficient but also maintains the integrity of delicate items, as the right settings can be applied with ease.

Energy efficiency is another hallmark of the UVN255P and SVN255P. Both models are engineered to reduce water and energy consumption, aligning with sustainability goals that are increasingly important in today’s business environment. As a result, these machines not only contribute to a lower carbon footprint but also promise significant savings on utility bills, ultimately enhancing profitability for businesses.

Durability is also a key characteristic of these models, crafted with robust materials that withstand the rigors of constant use in commercial settings. The stainless steel construction not only ensures longevity but also makes maintenance simpler and quicker, minimizing downtime for facilities reliant on continued operation.

Furthermore, both models incorporate advanced technology features such as real-time performance monitoring and diagnostic tools. These capabilities allow operators to troubleshoot issues swiftly, reduce machine downtime, and maintain optimal performance levels.

In summary, the Alliance Laundry Systems UVN255P and SVN255P stand out in the commercial laundry market due to their high capacity, energy efficiency, user-friendly controls, and durable build. These features come together to provide businesses with a powerful solution that meets the demanding needs of modern laundry operations, ensuring that they can deliver high-quality service to their customers with confidence.
Top Page Image Contents