Alliance Laundry Systems SVN255P Installation21, Electrical requirements Previous requirements

Page 21

Installation21

3.3.Electrical requirements

3.3.1.Previous requirements

CHECK THAT THE POWER AND FREQUENCY OF THE ELECTRICAL SUPPLY CORRESPONDS TO THOSE OF THE WASHER. Check the nameplate posted on the back panel of the machine.

ALL MATERIAL USED IN THE ELECTRIC INSTALLATION MUST COMPLY WITH THE REGULATIONS CURRENTLY IN FORCE IN EACH COUNTRY.

ALWAYS CONNECT THE GROUND EXTERNAL PROTECTION CIRCUIT. THIS UNIT MUST BE CONNECTED TO THE GROUND INSTALLATION WITH A CONDUCTOR CONNECTED TO THE EQUIPMENT GROUNDING TERMINAL.

Warning specific to machines in USA/CANADA installations.

GROUNDING INSTRUCTION. This machine must be connected to a grounded metal, permanent wiring system by means of a ground cable connected to the equipment grounding terminal on the machine.

3.3.2. Installation characteristics

Check the specific characteristics on the ELECTRICAL CONNECTION table (section 1.6).

Conductor:

Specifications referring to the conductor are based upon a multi-strand copper conductor.

The length of the conductor from the safety switch to the washer must not be longer than 30 ft (10 m.)

If using single-wire conductors, these must be encased within a safety conduit.

The conductor must be fixed to the inlet opening of the machine using a secure connection appropriate for the type of conductor or safety conduit.

The conductor must be secured against any pulling, crushing or rubbing.

Additional specifications for the conductors: they must comply with the statutory regulations of the country in which it is to be installed.

TILT MODELS

Electrical conductors must be flexible, capable of accommodating the washer movements during the loading and unloading operations and secured at their ends. Refer to section 4.5.

Circuit breaker. Install an earth-leakage protected circuit breaker.

Characteristics:

installed in an easily accessible place

number of poles and intensity: refer to ELECTRICAL CONNECTION table (section 1.6)

type A.

protected against pulse currents, harmonics, the presence of continuous components... (consult manufacturer specifications)

 

Cod. G522433

© Copyright 2009, Alliance Laundry System LLC – DO NOT COPY OR TRANSMIT

Rev. 00/0510

Image 21
Contents 1520001 UVN255PSVN255P Serial # Shipping dateDo not try to open the washer’s door if the drum is moving Safety InstructionsSafety Instructions Customer Service Replacement PartsElectric risk High temperature risk Copyright 2009, Alliance Laundry System LLCReason for which only Original Spare Parts Must be Used ∙ Epdm and NBRIndex Technical Information IndexMachine accessories Necessary tools for installationTechnical Information Technical InformationInstallation Specifications General specificationsMachine connections Connections Brackets specific values for USA / Canada Electrical requirementsTransportation and Location Transportation and locationTransport of machine Transporting crated machinesReleasing the security lock Washer location. Conditions Installation on NON Solid Grounds and Upper FloorsLocation specifications fig Installing more than one washerTilt Models Removal of shipping bracesTransportation and location Installation Installation18Drain A. Drain to the drain box Most recommended optionInstallation19 Water inletsSiphonage Contamination Prevention Installation20 Installation characteristics Installation21Electrical requirements Previous requirements ConductorInstallation22 PE/GNDMachine electrical connection Installation23 Installation characteristicsSteam connection Installation24 Connection of the machine to the steam installation figSteam connection in Tilt models Compressed air connection figure Installation25External dosing External dosing equipment connection to the washerUse of four dosing signals Installation26Once the conductor connection is done, Replace Lock the Covers Correctly Potential Free Relay ContactsRelay Contacts Powered from the Washer Control Circuit Installation27Signal Installation28Dosing BoardExternal dosing hoses connection InstallationInstallation30 Initial start-upSpecific verification of Tilt models Tilt Models Tilt modelsMax Water inlet installation proposalAssembly Instructions for the Tilt System Accessories Tilt system assemblyParts of the tilt system assembly Tools to assemble the tilt systemTilt hinge assembly Position detectors assembly and adjustment figure Assembling Tilt system guards figure

SVN255P, UVN255P specifications

Alliance Laundry Systems has long been recognized for its commitment to innovation and quality in the laundry industry, and the launch of the UVN255P and SVN255P models reinforces this reputation. Designed primarily for commercial laundry applications, these units bring robust performance, efficiency, and advanced technology to heavy-duty environments.

At the core of the UVN255P and SVN255P models is their impressive washing capacity. With a significant load size capability, these machines are perfect for laundromats, hotels, and other high-demand facilities, enabling operators to process more laundry in less time. This capacity not only enhances productivity but also optimizes labor costs, allowing for greater operational efficiency.

One standout feature of both models is their user-friendly control interface. The intuitive controls are designed to simplify operation, minimizing the learning curve for new users. Alongside this, the machines offer programmable cycles that can be tailored to suit various fabrics and cleaning requirements. This flexibility ensures that the laundry process is not only efficient but also maintains the integrity of delicate items, as the right settings can be applied with ease.

Energy efficiency is another hallmark of the UVN255P and SVN255P. Both models are engineered to reduce water and energy consumption, aligning with sustainability goals that are increasingly important in today’s business environment. As a result, these machines not only contribute to a lower carbon footprint but also promise significant savings on utility bills, ultimately enhancing profitability for businesses.

Durability is also a key characteristic of these models, crafted with robust materials that withstand the rigors of constant use in commercial settings. The stainless steel construction not only ensures longevity but also makes maintenance simpler and quicker, minimizing downtime for facilities reliant on continued operation.

Furthermore, both models incorporate advanced technology features such as real-time performance monitoring and diagnostic tools. These capabilities allow operators to troubleshoot issues swiftly, reduce machine downtime, and maintain optimal performance levels.

In summary, the Alliance Laundry Systems UVN255P and SVN255P stand out in the commercial laundry market due to their high capacity, energy efficiency, user-friendly controls, and durable build. These features come together to provide businesses with a powerful solution that meets the demanding needs of modern laundry operations, ensuring that they can deliver high-quality service to their customers with confidence.