Alliance Laundry Systems UVN255P, SVN255P Installation24, Steam connection in Tilt models

Page 24

Installation24

3.4.1. Steam connection in TILT models

ATTENTION!

The end of the steam supply pipe must be located in the same vertical plane as the steam inlet (V) of the washing machine. Otherwise the tilted movements cause torsion effects that can loosen the threaded couplings.

The value N of figure 17 allows to locate the vertical plane of the steam inlet regarding the centre of the washer. Refer to dimensions on Installation specifications (section 1.4.)

fig. 17

Connection of the machine to the steam installation (fig. 18)

Accessories for the steam connection to TILT washers (some accessories can be assembled as a single set)

A... steam inlet filter B... threaded coupling

C... connection flexible pipe. Long.: 1500mm (59 inch) D... threaded coupling

Assemble part D end with NPT thread to the steam conduits; the end with GAS thread must be connected to the flexible pipe C.

Assemble the steam filter A and the coupling B to the washer steam inlet.

Assemble the threaded coupling D to the steam s.

Join both couplings by means of flexible pipe C. Assemble the offset end to the washer.

fig. 18

Securely tighten the flexible pipe couplings.

ATTENTION!

DURING THIS OPERATION, HOLD THE ENDS OF THE

FLEXIBLE PIPE TO PREVENT IT FROM REMAINING

TWISTED (fig. 19).

 

fig. 19

 

Cod. G522433

© Copyright 2009, Alliance Laundry System LLC – DO NOT COPY OR TRANSMIT

Rev. 00/0510

Image 24
Contents UVN255P 1520001SVN255P Serial # Shipping dateSafety Instructions Do not try to open the washer’s door if the drum is movingSafety Instructions Replacement Parts Customer ServiceElectric risk High temperature risk Copyright 2009, Alliance Laundry System LLC∙ Epdm and NBR Reason for which only Original Spare Parts Must be UsedIndex Index Technical InformationNecessary tools for installation Machine accessoriesTechnical Information Technical InformationGeneral specifications Installation SpecificationsMachine connections Connections Electrical requirements Brackets specific values for USA / CanadaTransportation and location Transportation and LocationTransport of machine Transporting crated machinesReleasing the security lock Installation on NON Solid Grounds and Upper Floors Washer location. ConditionsInstalling more than one washer Location specifications figRemoval of shipping braces Tilt ModelsTransportation and location Installation18 InstallationDrain A. Drain to the drain box Most recommended optionInstallation19 Water inletsSiphonage Contamination Prevention Installation20 Installation21 Installation characteristicsElectrical requirements Previous requirements ConductorInstallation22 PE/GNDMachine electrical connection Installation23 Installation characteristicsSteam connection Installation24 Connection of the machine to the steam installation figSteam connection in Tilt models Installation25 Compressed air connection figureExternal dosing External dosing equipment connection to the washerInstallation26 Use of four dosing signalsOnce the conductor connection is done, Replace Lock the Covers Correctly Potential Free Relay ContactsInstallation27 Relay Contacts Powered from the Washer Control CircuitInstallation28 SignalDosing BoardInstallation External dosing hoses connectionInstallation30 Initial start-upSpecific verification of Tilt models Tilt models Tilt ModelsWater inlet installation proposal MaxTilt system assembly Assembly Instructions for the Tilt System AccessoriesParts of the tilt system assembly Tools to assemble the tilt systemTilt hinge assembly Position detectors assembly and adjustment figure Assembling Tilt system guards figure

SVN255P, UVN255P specifications

Alliance Laundry Systems has long been recognized for its commitment to innovation and quality in the laundry industry, and the launch of the UVN255P and SVN255P models reinforces this reputation. Designed primarily for commercial laundry applications, these units bring robust performance, efficiency, and advanced technology to heavy-duty environments.

At the core of the UVN255P and SVN255P models is their impressive washing capacity. With a significant load size capability, these machines are perfect for laundromats, hotels, and other high-demand facilities, enabling operators to process more laundry in less time. This capacity not only enhances productivity but also optimizes labor costs, allowing for greater operational efficiency.

One standout feature of both models is their user-friendly control interface. The intuitive controls are designed to simplify operation, minimizing the learning curve for new users. Alongside this, the machines offer programmable cycles that can be tailored to suit various fabrics and cleaning requirements. This flexibility ensures that the laundry process is not only efficient but also maintains the integrity of delicate items, as the right settings can be applied with ease.

Energy efficiency is another hallmark of the UVN255P and SVN255P. Both models are engineered to reduce water and energy consumption, aligning with sustainability goals that are increasingly important in today’s business environment. As a result, these machines not only contribute to a lower carbon footprint but also promise significant savings on utility bills, ultimately enhancing profitability for businesses.

Durability is also a key characteristic of these models, crafted with robust materials that withstand the rigors of constant use in commercial settings. The stainless steel construction not only ensures longevity but also makes maintenance simpler and quicker, minimizing downtime for facilities reliant on continued operation.

Furthermore, both models incorporate advanced technology features such as real-time performance monitoring and diagnostic tools. These capabilities allow operators to troubleshoot issues swiftly, reduce machine downtime, and maintain optimal performance levels.

In summary, the Alliance Laundry Systems UVN255P and SVN255P stand out in the commercial laundry market due to their high capacity, energy efficiency, user-friendly controls, and durable build. These features come together to provide businesses with a powerful solution that meets the demanding needs of modern laundry operations, ensuring that they can deliver high-quality service to their customers with confidence.