Alliance Laundry Systems UVN255P, SVN255P installation instructions Safety Instructions

Page 2

Safety Instructions

2

 

 

DANGER!

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock or injury to persons when using the washer, follow basic precautions, including the following:

1.READ all instructions before using the washer and KEEP them in a prominent location for customer use.

2.Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry cleaning solvents, and other flammable or explosive substances. These substances GIVE OFF VAPOURS that could ignite or explode.

3.Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances to the wash water. These substances give off vapours that could ignite or explode.

4.Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using the washing machine, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.

5.Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near children.

6.Before the washer is removed from service or discarded, REMOVE the door.

7.Do not try to open the washer’s door if the drum is moving.

8.Do not install or store the washer where it will be exposed to the weather or near possible water splashes.

9.Do not tamper with controls.

10.Do not repair or replace any part of the washer or attempt any servicing, unless specifically recommended in the user instructions or in published user-repair instructions that you understand and have the skills to carry out. DO NOT BY-PASS any safety device.

11.DO NOT BY-PASSany safety device. It is NOT ACCEPTED ANY electric or mechanic MODIFICATION OR MANIPULATION. DO NOT INSTALL foreign components inside the machine.

12.All SAFETY INSTRUCTIONS included in the Instruction Handbooks, should be reprinted and posted in the laundry room.

13.Failure to install and operate this machine according to the Instruction Handbooks or to work safety and hygiene standards and common sense, may result in conditions which CAN PRODUCE bodily injury or loss of life.

14.The DANGER, WARNING, CAUTION and IMPORTANT instructions appearing in the Instruction Handbooks are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution and carefulness are factors which cannot be built into this machine. These factors MUST BE supplied by the person(s) transporting, installing, maintaining, or operating the machine.

15.All connections for electrical power and plumbing MUST comply with the statutory safety standards applicable to each country, and be made by Licensed Installers only (refer to note 3).

 

Cod. G522433

© Copyright 2009, Alliance Laundry System LLC – DO NOT COPY OR TRANSMIT

Rev. 00/0510

Page 1 Page 3
Image 2
Page 1 Page 3
Contents SVN255P UVN255P1520001 Serial # Shipping dateSafety Instructions Do not try to open the washer’s door if the drum is movingSafety Instructions Electric risk High temperature risk Replacement PartsCustomer Service Copyright 2009, Alliance Laundry System LLC∙ Epdm and NBR Reason for which only Original Spare Parts Must be UsedIndex Index Technical InformationTechnical Information Necessary tools for installationMachine accessories Technical InformationGeneral specifications Installation SpecificationsMachine connections Connections Electrical requirements Brackets specific values for USA / CanadaTransport of machine Transportation and locationTransportation and Location Transporting crated machinesReleasing the security lock Installation on NON Solid Grounds and Upper Floors Washer location. ConditionsInstalling more than one washer Location specifications figRemoval of shipping braces Tilt ModelsTransportation and location Drain Installation18Installation A. Drain to the drain box Most recommended optionSiphonage Contamination Prevention Installation19Water inlets Installation20 Electrical requirements Previous requirements Installation21Installation characteristics ConductorMachine electrical connection Installation22PE/GND Steam connection Installation23Installation characteristics Steam connection in Tilt models Installation24Connection of the machine to the steam installation fig External dosing Installation25Compressed air connection figure External dosing equipment connection to the washerOnce the conductor connection is done, Replace Installation26Use of four dosing signals Lock the Covers Correctly Potential Free Relay ContactsInstallation27 Relay Contacts Powered from the Washer Control CircuitDosing Installation28Signal BoardInstallation External dosing hoses connectionSpecific verification of Tilt models Installation30Initial start-up Tilt models Tilt ModelsWater inlet installation proposal MaxParts of the tilt system assembly Tilt system assemblyAssembly Instructions for the Tilt System Accessories Tools to assemble the tilt systemTilt hinge assembly Position detectors assembly and adjustment figure Assembling Tilt system guards figure

SVN255P, UVN255P specifications

Alliance Laundry Systems has long been recognized for its commitment to innovation and quality in the laundry industry, and the launch of the UVN255P and SVN255P models reinforces this reputation. Designed primarily for commercial laundry applications, these units bring robust performance, efficiency, and advanced technology to heavy-duty environments.

At the core of the UVN255P and SVN255P models is their impressive washing capacity. With a significant load size capability, these machines are perfect for laundromats, hotels, and other high-demand facilities, enabling operators to process more laundry in less time. This capacity not only enhances productivity but also optimizes labor costs, allowing for greater operational efficiency.

One standout feature of both models is their user-friendly control interface. The intuitive controls are designed to simplify operation, minimizing the learning curve for new users. Alongside this, the machines offer programmable cycles that can be tailored to suit various fabrics and cleaning requirements. This flexibility ensures that the laundry process is not only efficient but also maintains the integrity of delicate items, as the right settings can be applied with ease.

Energy efficiency is another hallmark of the UVN255P and SVN255P. Both models are engineered to reduce water and energy consumption, aligning with sustainability goals that are increasingly important in today’s business environment. As a result, these machines not only contribute to a lower carbon footprint but also promise significant savings on utility bills, ultimately enhancing profitability for businesses.

Durability is also a key characteristic of these models, crafted with robust materials that withstand the rigors of constant use in commercial settings. The stainless steel construction not only ensures longevity but also makes maintenance simpler and quicker, minimizing downtime for facilities reliant on continued operation.

Furthermore, both models incorporate advanced technology features such as real-time performance monitoring and diagnostic tools. These capabilities allow operators to troubleshoot issues swiftly, reduce machine downtime, and maintain optimal performance levels.

In summary, the Alliance Laundry Systems UVN255P and SVN255P stand out in the commercial laundry market due to their high capacity, energy efficiency, user-friendly controls, and durable build. These features come together to provide businesses with a powerful solution that meets the demanding needs of modern laundry operations, ensuring that they can deliver high-quality service to their customers with confidence.
Top Page Image Contents