Alliance Laundry Systems UVN255P, SVN255P Assembling Tilt system guards figure

Page 36

Tilt system assembly

36

 

 

Adjustment of position detectors actuators (figure 44) The actuators C are secured to the bases through slots permitting their movement. To adjust their position:

∙The machine must be in the rest position.

∙Loosen mounting screws D of actuators C of position detectors.

∙Move completely the actuators to the washer’s outside until the microswitch disconnection «click» is heard. The wheel support lever E will remain in horizontal position.

∙Move the actuators C towards the position detectors until the microswitch connection «click» is heard and secure them in this position. (The contacts change of position is easily heard).

∙The actuator must move the lever wheel from the position detector upwards (refer to figure).

∙More information in the complementary schematic of TILT supplement. The schematic shows the machine in rest position.

∙Once the position detectors actuators adjustment continue removing the transport restraints, assembling the covers and installing the machine power supplies (section 2.5).

5.7.Assembling Tilt system guards (figure 45)

The arrow indicates the front of the machine.

∙ Position the rear and front guards. They can be easily identified as the corners are folded. The rear guard is distinguished by the drain hose groove.

∙ Remove screws, washers and sleeves screwed in the hinges A from the guards, secured to each of the four bases. Put the sleeves in the holes at the guards corners. Secure them using screws and washers. The sleeves must permit the guards movement. Rectify supports position if required, by loosing the mounting screws B and move them in the appropriate direction.

∙ Engage the springs C between the base brackets and the guards brackets (two springs for each bracket).

∙ Place the side guards between the side brackets and the folded corners of the front and rear guards.

∙ Place them so that the holes match with the threaded holes at the side brackets D. Secure them with screws (M6x10).

ATTENTION!

Never start the machine up or use it until all the covers have been replaced and properly locked.

fig. 36

fig. 37

 

Cod. G522433

© Copyright 2009, Alliance Laundry System LLC – DO NOT COPY OR TRANSMIT

Rev. 00/0510

Page 35 Page 36
Image 36
Page 35 Page 36
Contents UVN255P 1520001SVN255P Serial # Shipping dateSafety Instructions Do not try to open the washer’s door if the drum is movingSafety Instructions Replacement Parts Customer ServiceElectric risk High temperature risk Copyright 2009, Alliance Laundry System LLC∙ Epdm and NBR Reason for which only Original Spare Parts Must be UsedIndex Index Technical InformationNecessary tools for installation Machine accessoriesTechnical Information Technical InformationGeneral specifications Installation SpecificationsMachine connections Connections Electrical requirements Brackets specific values for USA / CanadaTransportation and location Transportation and LocationTransport of machine Transporting crated machinesReleasing the security lock Installation on NON Solid Grounds and Upper Floors Washer location. ConditionsInstalling more than one washer Location specifications figRemoval of shipping braces Tilt ModelsTransportation and location Installation18 InstallationDrain A. Drain to the drain box Most recommended optionInstallation19 Water inletsSiphonage Contamination Prevention Installation20 Installation21 Installation characteristicsElectrical requirements Previous requirements ConductorInstallation22 PE/GNDMachine electrical connection Installation23 Installation characteristicsSteam connection Installation24 Connection of the machine to the steam installation figSteam connection in Tilt models Installation25 Compressed air connection figureExternal dosing External dosing equipment connection to the washerInstallation26 Use of four dosing signalsOnce the conductor connection is done, Replace Lock the Covers Correctly Potential Free Relay ContactsInstallation27 Relay Contacts Powered from the Washer Control CircuitInstallation28 SignalDosing BoardInstallation External dosing hoses connectionInstallation30 Initial start-upSpecific verification of Tilt models Tilt models Tilt ModelsWater inlet installation proposal MaxTilt system assembly Assembly Instructions for the Tilt System AccessoriesParts of the tilt system assembly Tools to assemble the tilt systemTilt hinge assembly Position detectors assembly and adjustment figure Assembling Tilt system guards figure

SVN255P, UVN255P specifications

Alliance Laundry Systems has long been recognized for its commitment to innovation and quality in the laundry industry, and the launch of the UVN255P and SVN255P models reinforces this reputation. Designed primarily for commercial laundry applications, these units bring robust performance, efficiency, and advanced technology to heavy-duty environments.

At the core of the UVN255P and SVN255P models is their impressive washing capacity. With a significant load size capability, these machines are perfect for laundromats, hotels, and other high-demand facilities, enabling operators to process more laundry in less time. This capacity not only enhances productivity but also optimizes labor costs, allowing for greater operational efficiency.

One standout feature of both models is their user-friendly control interface. The intuitive controls are designed to simplify operation, minimizing the learning curve for new users. Alongside this, the machines offer programmable cycles that can be tailored to suit various fabrics and cleaning requirements. This flexibility ensures that the laundry process is not only efficient but also maintains the integrity of delicate items, as the right settings can be applied with ease.

Energy efficiency is another hallmark of the UVN255P and SVN255P. Both models are engineered to reduce water and energy consumption, aligning with sustainability goals that are increasingly important in today’s business environment. As a result, these machines not only contribute to a lower carbon footprint but also promise significant savings on utility bills, ultimately enhancing profitability for businesses.

Durability is also a key characteristic of these models, crafted with robust materials that withstand the rigors of constant use in commercial settings. The stainless steel construction not only ensures longevity but also makes maintenance simpler and quicker, minimizing downtime for facilities reliant on continued operation.

Furthermore, both models incorporate advanced technology features such as real-time performance monitoring and diagnostic tools. These capabilities allow operators to troubleshoot issues swiftly, reduce machine downtime, and maintain optimal performance levels.

In summary, the Alliance Laundry Systems UVN255P and SVN255P stand out in the commercial laundry market due to their high capacity, energy efficiency, user-friendly controls, and durable build. These features come together to provide businesses with a powerful solution that meets the demanding needs of modern laundry operations, ensuring that they can deliver high-quality service to their customers with confidence.
Top Page Image Contents