Alliance Laundry Systems SVN255P Installation19, Water inlets, Siphonage Contamination Prevention

Page 19

Installation19

TILT MODELS

After the starting-up of the washer, check that the loading and unloading movements don't no move the drain outlet hose out of the sewer drain box.

In installation with the connection directly to the sewer, the connections of both ends of the drain hose must be fastened.

3.2.Water inlets

Hoses and pipes should be flushed through before being connected to the machine.

Install at each water supply and in an accessible location, a mechanically interlocked water valve. Refer to technical specifications on the INSTALLATION SPECS, section 1.4.

IMPORTANT!

SIPHONAGE CONTAMINATION PREVENTION

If the washer extractor is directly connected to the water supply, an antisiphon device and a supplement filter must be connected either to the external supply inlet or prior to every connection. Follow the local and national regulations concerning the water supply system.

IMPORTANT!

PROTECTION AGAINST OVER-PRESSURES

IF THE SUPPLY PRESSURE IS HIGH AND FLUID HAMMERS OCCUR WHEN CLOSING THE VALVES, WE RECOMMEND INSTALLING A SMALL AIR VESSEL OR ANTI-FLUID-HAMMER DEVICE TO PREVENT PREMATURE DAMAGE TO MEMBRANES.

Assembling the filters and their connection (fig.14)

Directly assemble the supplied filters to the machine water inlets. Assure they are watertight by means of a suitable product. The arrow of the filter shows the direction of water flow. Connect the hoses to the filters. Do not forget the seals.

Arrangement of hoses

Inlets are identified by labels posted at each inlet (fig. 15).

The washer mixes hot and cold water according to the programmed temperature. The use of cold/hot water allows the machine to gain time and effectiveness in its washing programmes.

Inlet 1. Connect cold water.

Inlet 2. Connect hot water.

Inlet 3.

Connect cold or hot water according to the

 

washer configuration.

fig 14

TILT MODELS

The location of the water supply must allow that hoses accommodate the washer's movements during loading and unloading operations. Refer to section 4.5.

 

Cod. G522433

© Copyright 2009, Alliance Laundry System LLC – DO NOT COPY OR TRANSMIT

Rev. 00/0510

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Serial # Shipping date UVN255P1520001 SVN255PDo not try to open the washer’s door if the drum is moving Safety InstructionsSafety Instructions Copyright 2009, Alliance Laundry System LLC Replacement PartsCustomer Service Electric risk High temperature riskReason for which only Original Spare Parts Must be Used ∙ Epdm and NBRIndex Technical Information IndexTechnical Information Necessary tools for installationMachine accessories Technical InformationInstallation Specifications General specificationsMachine connections Connections Brackets specific values for USA / Canada Electrical requirementsTransporting crated machines Transportation and locationTransportation and Location Transport of machineReleasing the security lock Washer location. Conditions Installation on NON Solid Grounds and Upper FloorsLocation specifications fig Installing more than one washerTilt Models Removal of shipping bracesTransportation and location A. Drain to the drain box Most recommended option Installation18Installation DrainWater inlets Installation19Siphonage Contamination Prevention Installation20 Conductor Installation21Installation characteristics Electrical requirements Previous requirementsPE/GND Installation22Machine electrical connection Installation characteristics Installation23Steam connection Connection of the machine to the steam installation fig Installation24Steam connection in Tilt models External dosing equipment connection to the washer Installation25Compressed air connection figure External dosingLock the Covers Correctly Potential Free Relay Contacts Installation26Use of four dosing signals Once the conductor connection is done, ReplaceRelay Contacts Powered from the Washer Control Circuit Installation27Board Installation28Signal DosingExternal dosing hoses connection InstallationInitial start-up Installation30Specific verification of Tilt models Tilt Models Tilt modelsMax Water inlet installation proposalTools to assemble the tilt system Tilt system assemblyAssembly Instructions for the Tilt System Accessories Parts of the tilt system assemblyTilt hinge assembly Position detectors assembly and adjustment figure Assembling Tilt system guards figure

SVN255P, UVN255P specifications

Alliance Laundry Systems has long been recognized for its commitment to innovation and quality in the laundry industry, and the launch of the UVN255P and SVN255P models reinforces this reputation. Designed primarily for commercial laundry applications, these units bring robust performance, efficiency, and advanced technology to heavy-duty environments.

At the core of the UVN255P and SVN255P models is their impressive washing capacity. With a significant load size capability, these machines are perfect for laundromats, hotels, and other high-demand facilities, enabling operators to process more laundry in less time. This capacity not only enhances productivity but also optimizes labor costs, allowing for greater operational efficiency.

One standout feature of both models is their user-friendly control interface. The intuitive controls are designed to simplify operation, minimizing the learning curve for new users. Alongside this, the machines offer programmable cycles that can be tailored to suit various fabrics and cleaning requirements. This flexibility ensures that the laundry process is not only efficient but also maintains the integrity of delicate items, as the right settings can be applied with ease.

Energy efficiency is another hallmark of the UVN255P and SVN255P. Both models are engineered to reduce water and energy consumption, aligning with sustainability goals that are increasingly important in today’s business environment. As a result, these machines not only contribute to a lower carbon footprint but also promise significant savings on utility bills, ultimately enhancing profitability for businesses.

Durability is also a key characteristic of these models, crafted with robust materials that withstand the rigors of constant use in commercial settings. The stainless steel construction not only ensures longevity but also makes maintenance simpler and quicker, minimizing downtime for facilities reliant on continued operation.

Furthermore, both models incorporate advanced technology features such as real-time performance monitoring and diagnostic tools. These capabilities allow operators to troubleshoot issues swiftly, reduce machine downtime, and maintain optimal performance levels.

In summary, the Alliance Laundry Systems UVN255P and SVN255P stand out in the commercial laundry market due to their high capacity, energy efficiency, user-friendly controls, and durable build. These features come together to provide businesses with a powerful solution that meets the demanding needs of modern laundry operations, ensuring that they can deliver high-quality service to their customers with confidence.
Top Page Image Contents