Alliance Laundry Systems SVN255P, UVN255P installation instructions ∙ Epdm and NBR

Page 5

Safety Instructions

5

 

 

IMPORTANT INSTRUCTIONS FOR USE AND CONSERVATION

1.EXPECTED MACHINE USE AND DON’TS. This machine has been made and designed for industrial washing or cleansing in a water bath of linen and textile materials only. Linen and textile materials must be free from solvent impregnation or explosives. Any other use will be considered contraindicated without the written authorization of the manufacturer.

Under-loading as well as overloading is not recommended. Always endeavour to meet the capacity of the machine.

It is not recommended to wash the linen inside bags. Should it be necessary, load the machine up to its nominal value.

It is not recommended to spin carpeting, canvas or waterproof fabrics.

2.Machine MATERIALS in contact with wash products are:

∙Stainless Steel AISI-304 L

∙EPOXY coating on steel (in some models)

∙Polypropylene PP

∙EPDM and NBR

∙Borosilicate glass

3.The user must inquire the chemical product supplier about the risks of chemicals and its combination. The user is responsible to assure that products ARE COMPATIBLE and will not produce machine oxidation or damage either to people or to the washer.

Notice that the hypochlorite (bleach), in certain conditions of use, generates chlorine gas.

Chlorine is a corrosive and oxidizing substance that, in high concentrations and temperature, deteriorates the stainless steel and elastomers.

There are other highly oxidizing agents, such as the ozone, that can have the same effect.

4.Periodically CLEAN the machine. You will prevent metallic parts corrosion and produce higher output and have a longer life. To clean the washing machine, use water and detergent, rinse with a damp cloth, and dry. Cleaning with water jets or pressurised steam is forbidden.

5.Once the wash cycle has finished, THE WASHER DOOR MUST REMAIN OPEN.

∙This allows for the ventilation of the washer interior

∙Avoids the appearance of harmful micro organisms.

∙This extends the lifetime of the door latch.

6.NEVER use harsh products to clean the machine and laundry room. There are products on the market, which are highly corrosive.

7.If machine is left idle for long periods of time, it must be PROTECTED from humidity and temperature variations.

8.FOLLOW the fabric care instructions supplied by the manufacturer, THE MANUFACTURER REFUSES ANY RESPONSIBILITY IN CASE OF TEXTILE WEAR AND TEAR.

9.Failure due to improper machine operation may VOID WARRANTY.

10.Replacing any part of the washer can affect the machine’s safety. Examples:

∙A screw or bolt of insufficient strength could cause dangerous damage.

∙A heater without an internal fuse could provoke a fire.

∙An inadequate clamp can be the cause of water leaks and short circuits... etc.

The reason for which ONLY ORIGINAL SPARE PARTS MUST BE USED.

Failure to take heed of this precaution may result in a washer breakdown, a serious accident, and loss of guarantee.

11.When asking for information on your machine, MENTION model and serial number (SERIAL PLATE is located at the rear side. Refer to fig. 2).

12.THE ELECTRICAL DIAGRAM IS LOCATED IN THE UNDERSIDE OF THE WASHER’S TOP COVER.

 

Cod. G522433

© Copyright 2009, Alliance Laundry System LLC – DO NOT COPY OR TRANSMIT

Rev. 00/0510

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 1520001 UVN255PSVN255P Serial # Shipping dateDo not try to open the washer’s door if the drum is moving Safety InstructionsSafety Instructions Customer Service Replacement PartsElectric risk High temperature risk Copyright 2009, Alliance Laundry System LLCReason for which only Original Spare Parts Must be Used ∙ Epdm and NBRIndex Technical Information IndexMachine accessories Necessary tools for installationTechnical Information Technical InformationInstallation Specifications General specificationsMachine connections Connections Brackets specific values for USA / Canada Electrical requirementsTransportation and Location Transportation and locationTransport of machine Transporting crated machinesReleasing the security lock Washer location. Conditions Installation on NON Solid Grounds and Upper FloorsLocation specifications fig Installing more than one washerTilt Models Removal of shipping bracesTransportation and location Installation Installation18Drain A. Drain to the drain box Most recommended optionSiphonage Contamination Prevention Installation19Water inlets Installation20 Installation characteristics Installation21Electrical requirements Previous requirements ConductorMachine electrical connection Installation22PE/GND Steam connection Installation23Installation characteristics Steam connection in Tilt models Installation24Connection of the machine to the steam installation fig Compressed air connection figure Installation25External dosing External dosing equipment connection to the washerUse of four dosing signals Installation26Once the conductor connection is done, Replace Lock the Covers Correctly Potential Free Relay ContactsRelay Contacts Powered from the Washer Control Circuit Installation27Signal Installation28Dosing BoardExternal dosing hoses connection InstallationSpecific verification of Tilt models Installation30Initial start-up Tilt Models Tilt modelsMax Water inlet installation proposalAssembly Instructions for the Tilt System Accessories Tilt system assemblyParts of the tilt system assembly Tools to assemble the tilt systemTilt hinge assembly Position detectors assembly and adjustment figure Assembling Tilt system guards figure

SVN255P, UVN255P specifications

Alliance Laundry Systems has long been recognized for its commitment to innovation and quality in the laundry industry, and the launch of the UVN255P and SVN255P models reinforces this reputation. Designed primarily for commercial laundry applications, these units bring robust performance, efficiency, and advanced technology to heavy-duty environments.

At the core of the UVN255P and SVN255P models is their impressive washing capacity. With a significant load size capability, these machines are perfect for laundromats, hotels, and other high-demand facilities, enabling operators to process more laundry in less time. This capacity not only enhances productivity but also optimizes labor costs, allowing for greater operational efficiency.

One standout feature of both models is their user-friendly control interface. The intuitive controls are designed to simplify operation, minimizing the learning curve for new users. Alongside this, the machines offer programmable cycles that can be tailored to suit various fabrics and cleaning requirements. This flexibility ensures that the laundry process is not only efficient but also maintains the integrity of delicate items, as the right settings can be applied with ease.

Energy efficiency is another hallmark of the UVN255P and SVN255P. Both models are engineered to reduce water and energy consumption, aligning with sustainability goals that are increasingly important in today’s business environment. As a result, these machines not only contribute to a lower carbon footprint but also promise significant savings on utility bills, ultimately enhancing profitability for businesses.

Durability is also a key characteristic of these models, crafted with robust materials that withstand the rigors of constant use in commercial settings. The stainless steel construction not only ensures longevity but also makes maintenance simpler and quicker, minimizing downtime for facilities reliant on continued operation.

Furthermore, both models incorporate advanced technology features such as real-time performance monitoring and diagnostic tools. These capabilities allow operators to troubleshoot issues swiftly, reduce machine downtime, and maintain optimal performance levels.

In summary, the Alliance Laundry Systems UVN255P and SVN255P stand out in the commercial laundry market due to their high capacity, energy efficiency, user-friendly controls, and durable build. These features come together to provide businesses with a powerful solution that meets the demanding needs of modern laundry operations, ensuring that they can deliver high-quality service to their customers with confidence.
Top Page Image Contents