Blomberg WM 87120 NBL00 Transportation, Disposal Information, Appliance Disposal

Page 14

checked for any leaks by turning on both faucets.

Drain installation is done properly and drain hose is checked and secured to prevent any flooding.

Washer is connected the junction box which is plugged to a properly grounded live mains outlet.

Be sure that power outlet, water faucets and drain outlet must be always accessible to the user.

Transportation

Before you transport the washer, you should carry out the following:

1.Turn off both water faucets.

2.Before you disconnect the water inlet hoses, decrease the pressure inside hoses by turning on the washer choosing any wash program. As soon as the Start/Pause/Cancel led starts blinking, turn off the appliance. You may securely disconnect inlet hoses without any water gush.

3.Disconnect the drain hose and hang it on the back plate by inserting into the holder plastic brackets.

4.Unplug the power cord and hang it on the back plate by inserting into the holder plastic brackets.

5.Remove bolt hole covers and reinstall shipping bolts to their places. You can apply the procedure in chapter “Removing shipping bolts” in reverse to accomplish this.

6.Be sure that rubber bushes are properly located in holes and bolts are screwed back tightly for secure transportation of the appliance.

Disposal Information

Packing Disposal

A WARNING - Packing materials of the appliance are potentially dangerous for children. Materials such as plastic bags, films or wrappings must be kept away from children or disposed properly to prevent the danger of suffocation.

C Packing materials are made of biodegradable and recyclable substances. You should consult your local authority or dealer about the

environmental-friendly disposal of the packaging of your appliance.

Appliance Disposal

A WARNING - Be sure to unplug the power cable, cut off the plug and disable the door lock before you dispose your old appliance. Otherwise there is a risk of injury for children and pets.

C Old appliances contain many recyclable parts. You should consult your local environmental authority about a proper disposal. A proper disposal enables recycling therefore protects the environment.

14

EN

Image 14
Contents Front-Loading Automatic Washer WM 87120 NBL00 This guide will… Explanation of symbolsPlease read this guide first Table of Contents Your Washer OverviewSpecifications Important Safety Instructions Page Page Installation Clearances Installation InstructionsRight Location Installation Stacked Installation Allowable Clearances for Undercounter InstallationAllowable Clearances for Closet Installation Removing packaging reinforcementGrounding Instructions Levelling the washerElectrical Connection Power supply and circuit Water Supply ConnectionInstallation Checklist DrainageAppliance Disposal TransportationDisposal Information Packing DisposalLaundry Tips Operating InstructionsFirst Use Before the first usePreparing the laundry Loading the washerDetergent Use Detergent QuantityWater Consumption Liquid Chlorine Bleach CompartmentControl panel Display symbolsSelecting a Program and Operating Your Washer Wash Cycles Turning the washer onProgram cycle selection Additional programsSpin Speed selection Temperature selectionSpecial programs Program Cycle Selection Table Soak Auxiliary functionsAuxiliary Function Selection Buttons Extra RinseCanceling the time delay Time delayChanging the delay time Time displayProgress of program Switching the washer to standby modeStarting the Program Changing the selections after the program has startedEnd of program Ending the program through cancelingChild-proof lock Starting Canceling a programPreparation Adding more laundryIf you want to discharge the water without spinning Re-spinning the laundryCleaning the door seal User maintenance instructionsCleaning detergent dispenser Cleaning the outer cabinet and control panelCleaning the water inlet strainers Cleaning the drain pump filterDescaling the washer Troubleshooting LCD Washer will wait until there is a Automatic spin correction Laundry in the drum. No spinning Do not load the washer in excess Insufficient amount of detergent can Laundry in the machine. The laundry Be clogged Start/Pause/Cancel button for a short Warranty Statement for the Blomberg Clothes Washers HOW to GET Service